Im having the same exact problem.
Help us please
Is it possible to set my display resolution permanantly to 1024x768 @ 75 Hz with colour depth 24, (when I set this using K XConfig it says the changes will be enabled at the next session, but they never are. In fact K XConfig always shows my display as 640x480 @ 63 Hz colour depth 8, no matter what I input .....thanks for any help.
Im having the same exact problem.
Help us please
I have a Laptop P200MMX and I can't set a good resolution on text mode. I start Knoppix with text option but de workarea is bigger than the real display, like a "vertical" resolution, I lose the 12 bottom lines. Can anyone help me? please. I only need the laptop for programming, so this feature is essential for me. Thanks a lot & sorry, my english is poor, i'm spanish. Bye
If you run from the knoppix-live-cd you cant set anything permanent because there is nothing saved... but you can use, at startup, the cheatcodes (if im right, you can use f1 to get known to them).
something likeshould do ?!?!? try it...Code:knoppix screen=1024x786 xvrefresh=70
maybe (i haven't tried that) you can save your configuration to your harddisk, using some program in the knoppix-submenu. but again, im not sure...
and after an hd-install kxcontrol should save its settings normally...
good luck!
I'm not using the live CD, knoppix is installed to my HD, so I'm confused why K Xconfig shows my res at 640x480. when I ran the live CD I had perfect resolution filling my screen, but since the HD install the resolution is reduced, I need to set it permanantly to 1024 x 786.
Boot from the CD and get the screen you want then mount the partition containing / and copy the X config file.Originally Posted by Patrick21
Replace the ?? with the drive letter and partition number once copied reboot to the new settings you may also want to backup the file before you overwrite. sudo cp /mnt/hd??/etc/X11/XF86Config-4 /mnt/hd??/etc/X11/XF86Config-4.originalCode:sudo mount /dev/hd?? /mnt/hd?? sudo cp /etc/X11/XF86Config-4 /mnt/hd??/etc/X11/XF86Config-4
thanks Steve, I'll give it a try.
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00