mkxf86config is used to make your /etc/X11/XF86Config-4
soundcardconfig is used to setup the sound card
Not sure if soundcardconfig is used by knoppix, but you can see that mkxf86config is.
Joshua SS Miller
I'm trying to install knoppix to an IOpener. I can't have a cd-rom and hard drive at the same time on that machine, so I installed knoppix to the hard drive of another machine and moved the hard drive to the Iopener. It boots fine, but the video and sound device drivers aren't right. Is there any way to trigger the auto detection, at this point?
mkxf86config is used to make your /etc/X11/XF86Config-4
soundcardconfig is used to setup the sound card
Not sure if soundcardconfig is used by knoppix, but you can see that mkxf86config is.
Joshua SS Miller
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$299.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00