Hi XRAIDED,
Better: knoppix lang=us noapm nosmp noapicknoppix lang=us no apm no smp no apic
Ciao Martin
can some1 please help i cant seem to get d knoppix 3.2 to boot it works on my other pc n its d same cpu as dis 1 except the other one uses sd intead of ddr and i have tried the command at boot "knoppix lang=us no apm no smp no apic n it still d same, would knoppix 3.3 work better ? Can some 1 please help.
P3 1GHz
512 DDR
GeForce 4 mx440 128 bit DDR 8x
80gig hdd
30gig hdd
SB LIve
Leadtek winfast TV Tuner card
Hi XRAIDED,
Better: knoppix lang=us noapm nosmp noapicknoppix lang=us no apm no smp no apic
Ciao Martin
bro i already tried exactly like u tyoe it
my comp wont go anyfurther than starting kit the turns the monitor off its like its about to start it freezes n dats all it does i have left it so i can see if it continues but nuthing happens
graphics issue?
xmodule=vesa
try that
thanx bro i dl version 3.3 n it solved the issues i had at d end i figured out wat was stuffin it up it was my monitorsince the other pc has a newer monitor it didn't give any problems thanxs 4 d help
The noddc cheat code would have stopped detection of the monitor and may allow you to boot with it attached the xvrefresh=60 could help too.Originally Posted by XRAIDED
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99