-
Can't find Knoppix filesystem
I have a functioning Knoppix CD which I frequently use in my (relatively) new P4 system.
However, I recently made a boot floppy to use this same CD in my ten year old Pentium MMX system (which can't boot from CD).
Everything seems to work fine, as Knoppix finds my SCSI Plextor CD-ROM and uses fdomain.o, but it then scans multiple directories and gives me the error "Can't find Knoppix filesystem..." and something about a "(very limited) shell".
Any thoughts?
BTW, I'm new to Linux and Knoppix...
-
Senior Member
registered user
I know that you say you have a functioning knoppix cd, but you ought nevertheless to check the integrity of the disk. Try booting from the computer that works, but boot with the following cheat code: knoppix testcd
The only other thing I can think of is if your mmx machine as a really small amount of ram.
-
Used testcd cheat code, and everything checked out ok.
The MMX machine has 96Mb of RAM...
-
Being new... does the lack of replies indicated that:
(1) I've posted this in the wrong place
(2) This is a silly question that's been rehashed dozens of times, or
(3) Nobody has any insight as to what's wrong with my system...
-
Knoppix 3.3 and KnoppMyth
I also have this error. I tried Knoppix 3.3 on a machine at work, and got this error. A week later, I tried to install KnoppMyth on a computer at home and got the same error. I don't know what version Knoppix KnoppMyth is based on, but the only similarity I found between the two installs was both computers are Dells. One a Dimension 4400 & the other a Precision 450.
I did some research:
http://www.knoppix-std.org/faq.html
and found this:
I get the error “Can't find Knoppix filesystem.” then it drops me to a “limited shell”. What the hell?
This means you are not using a SCSI or IDE CDROM drive. After Syslinux starts up the first thing Knoppix wants to do is find and uncompress the filesystem (that big KNOPPIX file on the CD). Knoppix only probes for the CD on all SCSI and IDE buses. If it can't find it you'll get the error above.
For Transmeta laptops and some Sonys with PCMCIA cd drives try:
knoppix ide2=0x180 nopcmcia
Now I'm a bit confused, because both of my machines have the standard CDROM on the IDE bus. So, I don't get it. Maybe a problem with dells?
Hope that helps.
Similar Threads
-
By boomer777 in forum Hardware & Booting
Replies: 0
Last Post: 06-11-2005, 10:26 PM
-
By mariuss in forum Hardware & Booting
Replies: 2
Last Post: 02-23-2005, 02:48 AM
-
By colonius in forum Customising & Remastering
Replies: 1
Last Post: 11-20-2004, 06:09 PM
-
By pskipw in forum General Support
Replies: 0
Last Post: 05-07-2004, 06:16 AM
-
By sfit in forum Customising & Remastering
Replies: 1
Last Post: 03-18-2004, 05:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPGYT DELL Micron 5100 PRO 960GB SATA 6Gb/s 2.5in SSD 0HPGYT MTFDDAK960TCB Gen14
$69.00
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
### MZ-7KE1T0 Samsung 850 Pro Series 1TB 2.5 inch SATA3 SSD ###
$105.00
WD 500GB My Passport SSD, Portable External Solid State Drive WDBAGF5000ARD-WESN
$59.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$13.99
Patriot P210 256GB SSD 2.5" SATA III 6GB/s Internal Solid State Drive For PC/MAC
$19.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5''SATA III Internal Solid State Hard Drive LOT
$188.99
M.2 NVMe SSD 128GB 256GB 512GB Single Notch with Windows Installed 10 / 11
$85.25