By making substantial use of KNOPPIX-DATA on a reiserfs formatted /dev/sda3 I have managed to customise KNOPPIX at boot pretty well as preferred.
However: one final (almost trivial) alteration eludes me.
I would like to tweak the boot init executable file which I think is the one that resides in minirt.gz.
Using a temporary ext2 filesystem as my vehicle for managing this:
1) copy minirt.gz to temp and de-compress minirt.gz using gunzip: this yields a file minirt
2) move to a dofferent subdirectory under temp and extract minirt here with the command cpio -idm < {pathto}/minirt
3) the init file is seen here: edit it - (I'm just tweaking the messages sent to screen at boot) - and save it
4) chmod a+x init and chmod a+w init, as originally found
5) wrap the while thing as a revised minirt to a different subdirectory under temp using find . | cpio -o > {newpathto}/minirt
6) compress the new minirt using gzip --recursive --rsyncable (not sure whether either switch is actiually required)
and finally
7) save the old minirt.gz as minirt.orig.gz in case of failure (see below!)
8 ) copy the new minirt.gz to replace the original.
Then reboot, hoping for success.
But actually get failure at boot with the error message:
"kernel panic - not syncing - unable to mount root fs on unknown-block(0,0)"
I feel I'm almost there at my ideal customised KNOPPIX, and without the hugely complex time-consuming and likely error-prone process of re-mastering.
Has anybody else tried this easier approach and successfully replaced minirt.gz with their own version?
Thank you for any insight or refined practice for 1-8 above .. ..
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$125.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 32Cores - 128GB Ram - 800GB SSD
$299.00
Cisco WSA S390 Server UCS C220 M4 | 1x Xeon E5-2620v3 32GB RAM No Storage
$111.96
Dell Poweredge R420 3.5" 2x Xeon E5-2430 2.2ghz 12-Cores 24gb 2x 1TB 2x 550w
$169.99