put a knoppix.sh on your bootfloppy or whereever and make sure it's chmodd'd to the write permissions.
If I add a link to myscript in /etc/X11/xinit/xinitrc, myscript runs properly at startx. If I place a link in the autostart knoppix.sh on floppy ('floppyconfig'), it does not run. I guess this is because init has not yet run when knoppix.sh does.
Can anyone suggest a way of modifying xinitrc automatically when booting knoppix CD with floppy disk without remastering?
put a knoppix.sh on your bootfloppy or whereever and make sure it's chmodd'd to the write permissions.
I've done just that. At the moment knoppix.sh executes, there is not yet support for perl.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99