Check out Knoppix.net ->Docs->HD Based How To. Describes how to copy the CD to HD then boot into it either useing a boot floppy or by installing LILO to the MBR.
Is it possible to install Knoppix on the same partion as Windows (or a partion that is not empty and shouldn't be deleted)?
I know about these two boot options but are they safe?
knoppix tohd=/dev/hda1 Copy CD to HD partition and run from there
knoppix fromhd=/dev/hda1 Boot from previously copied CD-Image
and would this option make it possible to boot from a floppy:
dd if=/cdrom/KNOPPIX/boot.img of=/dev/fd0 bs=18k
if I modify it like this:
dd if=/dev/hda1/boot.img of=/dev/fd0 bs=18k
The best solution to me would be if it is possible simply to copy knoppix on the hdd and to make an option for the Windows boot manager for booting knoppix. I don't want to mess with lilo or my system in any way.
Check out Knoppix.net ->Docs->HD Based How To. Describes how to copy the CD to HD then boot into it either useing a boot floppy or by installing LILO to the MBR.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$154.96
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00