Bad:
image=/mnt/hda5/boot/vmlinuz-2.4.22-xfs
Good:
image=/hda5/boot/vmlinuz-2.4.22-xfs
Get rid of all those entries that start w/ /mnt.
Hi all,
this is surely a LILO problem, but I cannot figure out myself, what the
heck I am doing wrong.
I have installed the CD to /dev/hda10, a reasonably big partition.
Now there are several smaller partitions like>
/ ==> /dev/hda5
/usr ==> /dev/hda6
/var ==> /dev/hda8
/home ==> /dev/hda9 ...
which I want to use.
I have copied the files with cp -ax to their respective target partitions
and I think this should be allright.
Running lilo doesnt show any mistakes to me, so I am really struggling
why it always boots with /dev/hda10 as root device,despite the lilo.conf.hda5 that I have edited:
Important parts of lilo.conf.hda5:
---snip---
boot=/dev/hda
root=/dev/hda5
install=/mnt/hda5/boot/boot-menu.b
map=/mnt/hda5/boot/map
default=Linux-hda5
image=/mnt/hda5/boot/vmlinuz-2.4.22-xfs
label=Linux-hda5
initrd=/mnt/hda5/boot/initrd.gz
read-only
root=/dev/hda5
image=/boot/vmlinuz-2.4.22-xfs
label=Linux
initrd=/boot/initrd.gz
read-only
root=/dev/hda10
---snap---
lilo -C /mnt/hda5/etc/lilo.conf.hda5
produces the following output:
---snip---
...
Added Linux-hda5 *
<dev=0xe0,hd=20,cyl=66,sct=197>
"ro root=305 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce"
...
Added Linux
Device 0x030a: BIOS drive 0x80, 255 heads, 4864 cylinders,
63 sectors. Partition offset: 55135143 sectors.
---snap---
After reboot, it will always boot into /dev/hda10.
What is wrong?
Tnx Thomas
Bad:
image=/mnt/hda5/boot/vmlinuz-2.4.22-xfs
Good:
image=/hda5/boot/vmlinuz-2.4.22-xfs
Get rid of all those entries that start w/ /mnt.
But /hda5 does not exist.Originally Posted by rickenbacherus
If I specify an image, ..., it should exist when lilo runs.
This does not make sense to me.
I get the impression it is the initrd which is voiding my attempts
to use a different root partition.
http://www.knoppix.net/forum/viewtopic.php?t=3053#14435
So I would need to change that in linuxrc.in the linuxrc script in the initrd image mount /dev/hda6 is HARDCODED
Any ideas how to do that?
Thomas
the image and initrd references should be relative to your root definition so:image=/mnt/hda5/boot/vmlinuz-2.4.22-xfs
initrd=/mnt/hda5/boot/initrd.gz
image=/boot/vmlinuz-2.4.22-xfs
and
initrd=/boot/initrd.gz
should work,
if not you should use the devices not the mount points like this:
image=/dev/hda5/boot/vmlinuz-2.4.22-xfs
and
initrd=/dev/hda5/boot/initrd.gz
~rock
***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3
$29.77
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$24.99
ASUS ROG Strix B650E-F Gaming WiFi AM5 ATX AMD Motherboard
$115.00
MSI A320M-A PRO AM4 AMD A320 USB3.2 Gen1 Micro-ATX Motherboard
$46.99
Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151
$31.95
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$47.49
Gigabyte GA-B75M-HD3 Intel LGA1155 DDR3 Desktop Motherboard MicroATX USB 3.0
$26.99
BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled
$59.99
GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box
$115.00