I'm trying to use Knoppix on both my office machine and my home laptop, inside a VMWare enviroment in both cases, using the "Save configuration" feature to store my settings on a USB stick for use on both machines.
The only problem I'm having is with screen resolutions. At the office I have a large monitor, and prefer to work with a resolution of 1280x1024. My laptop at home has an LCD screen with a maximum resolution of 1024x768.
It is my understanding that when you specify monitor resolutions for each color depth in your XF86Config file, X will always default to the first one on the list. Therefore, I made the line inside each af the color depths look something like this:
"1024x768" "1280x1024" "800x600" etc
My hope was that this would cause X to start with a resolution of 1024x768, but have 1280x1024 available as an option for me to switch to at the office using "xrandr". If I don't list "1280x1024" in XF86Config-4, it isn't available to switch to dynamically at all.
However, the system is ALWAYS attempting to start X in "1280x1024"... even though "1024x768" is listed as the first choice for all color depths. Is there something I'm missing here?
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99