I'm trying to use Knoppix on both my office machine and my home laptop, inside a VMWare enviroment in both cases, using the "Save configuration" feature to store my settings on a USB stick for use on both machines.
The only problem I'm having is with screen resolutions. At the office I have a large monitor, and prefer to work with a resolution of 1280x1024. My laptop at home has an LCD screen with a maximum resolution of 1024x768.
It is my understanding that when you specify monitor resolutions for each color depth in your XF86Config file, X will always default to the first one on the list. Therefore, I made the line inside each af the color depths look something like this:
"1024x768" "1280x1024" "800x600" etc
My hope was that this would cause X to start with a resolution of 1024x768, but have 1280x1024 available as an option for me to switch to at the office using "xrandr". If I don't list "1280x1024" in XF86Config-4, it isn't available to switch to dynamically at all.
However, the system is ALWAYS attempting to start X in "1280x1024"... even though "1024x768" is listed as the first choice for all color depths. Is there something I'm missing here?
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 256GB (16GBx16) 2Rx4 PC3L-10600R DDR3 ECC RDIMM Server Memory #99
$124.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98