-
LCD Monitors and Knoppix
Hi,
I have a Fujitsu Siemens LCD 15" model 38B1 and while Xserver is starting the monitor tell "frequency not supported"
My video card is Matrox G400 and it is well recognized during the loading of kernel..
I tried many cheat codes like setting resolution screen and xvrefresh but nothing seems to resolve this problem!
I can't understand why with notebook lcd screens Knoppix is good and with many LCD screen not at all.
I read another post about Sony Flatscreen with similar problems.
Can anyone help me?
thanks
Rob
-
Junior Member
registered user
That's odd. On this machine, it works fine on my similar TFT of the same size. They normally work ononly 60Hz by the way (which is not a disadvantage for LCD tech). In fact, it's the only machine/monitor in the house that Knoppix does work on. If it was down to the other two monitors, I'd have thrown Knoppix in the bin long ago - I'd never have got to see it at all, it only succeeds in shutting down the other monitors.
-
Exactly the same problem here with a flat screen "IIYAMA AS314UT"!
Whatever I try, it says 'input not supported', even starting with the option vga=normal whiwh should be the standardized output...
However, no problem to have it running on my laptop.
Any idea.?
-
Senior Member
registered user
booting in fail safe worked for me (dell ultrasharp flat-panel).
The only problem with that is now my mouse won't work (dell logitech usb optical wheelmouse)....
any help would be nice... I dont want to boot in failsafe all the time...
-
Senior Member
registered user
I got it working... I used "knoppix xmodule=vesa" and it worked.... It appears my monitor only supports vesa....
-
I tried xmodule =vesa and other settings like xvrefresh = 60 and both but nothing! My Fujitsu Siemens 38 B1 isn't good for Knoppix
Please Can you suggest anything else?
Thanks
Rob
-
Senior Member
registered user
I would get the manual out, or look up online what display modes it supports, and type "knoppix xmodule=XXXX" Where XXXX is the name of the module.
-
Try "fb 1024x768" (without "knoppix", just fb 1024x768 at boot line) this works with my two LCD monitors
-
Senior Member
registered user
could it be possible than a combination of the two is in order? i.e. a vesa mode only and need the fb option too?
-
Junior Member
registered user
This problem has to de with the differences between CRT-/LCD-monitors.
I think Knoppix tries to check the refreshrate of the monitor, but this works different on an LCD / TFT monitor.
There lies the problem I think...
Similar Threads
-
By dragonforce99 in forum Hardware & Booting
Replies: 3
Last Post: 07-08-2004, 11:45 PM
-
By nicorelli in forum General Support
Replies: 0
Last Post: 07-01-2004, 12:09 AM
-
By gyro in forum Hardware & Booting
Replies: 1
Last Post: 01-10-2004, 10:31 PM
-
By Simon_Haddad in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 10-27-2003, 06:23 AM
-
By ledatica in forum Laptops
Replies: 4
Last Post: 10-15-2003, 08:36 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HYNIX HMT31GR7BFR4C-H9 8GB PC3-10600R DDR3-1333MHZ 2Rx4 (LOT OF 8) DRAT-3
$999.00
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
EDGE SK Hynix 16GB (2 x 8GB) PC3L-12800S DDR3 SODIMM Laptop RAM NEW
$16.95
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
TEAMGROUP T-FORCE DELTA RGB 32GB (2 x 16GB) PC5-48000 (DDR5-6000) DIMM CL30
$67.95
[ BULK LOT OF 20 ] UNITS of 8GB DDR4 Laptop RAM SAMSUNG, HYNIX etc.
$179.99
Team Group Elite+ 16GB (8GBx2) DDR4 2400MHz RAM (TPRD48G2400HC16BK)
$23.99
Dell SNPTP9W1C/16G 16 GB 2666MHz (PC4-2666) Memory Ram
$42.95
128GB Kit 4x 32GB PC4-17000 LRDIMM DELL POWEREDGE R730xd R730 R630 Memory RAM
$127.96