I had a 256M swap partition on /dev/hda1, but wanted to change it to 1G so that I can start working with remastering Knoppix.
I used cfdisk to blow away the old partition, created a new 1G (type 82) swap partition, ran "mkswap /dev/hda1" and then "swapon /dev/hda1". All worked well. The free command showed swap is active and in use.
However, now when I reboot using LiveCD, I always have to do a swapon command to get swap to start up.
Any suggestions on how to get this to be automatically started when booting Knoppix?
Thanks in advance,
Paul
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
Lot Of 2 Seagate Desktop Hard Drive 2000GB HDD ST2000DM001 7200RPM
$39.99
Lot Of 3 Seagate Constellation ST2000NM0033 2 TB,7200 RPM,128MB SATA 3.5 inch
$59.99
HP Hard Drive Cage w/ Backplane 670078-001
$233.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$112.00
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$14.87
8TB Seagate Archive SATA 3.5" HDD Hard Drive 100% Healthy 200MB/s ST8000AS0002
$36.54
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99