The default boot runlevel is 5 (check your /etc/inittab), so you should create a link under /etc/rc5.d similar to the one you see under rc3.d, and it will be run at startup.
Successfully installed Knoppix 3.3 to the harddrive of a Sony Z505-HS laptop and everything (except the winmodem) works. However, I can't for the life of me figure out how to make the pcmcia services autostart. I have to do a manual 'pcmcia start' after booting. I installed off a pcmcia cdrom drive after booting using the nopcmcia option which is probably why it isn't starting by default.
There is a S15pcmcia script in /etc/rc3.d. After reading up on init.d, it seems that that would be sufficient. Could someone clue me in on what I'm missing?
TIA...
The default boot runlevel is 5 (check your /etc/inittab), so you should create a link under /etc/rc5.d similar to the one you see under rc3.d, and it will be run at startup.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M5 V07 Blade Server chassis with (2x) Heatsinks
$299.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99