-
Knoppix, MD 9.2 and XP - Lilo Probs
Hi
I had my machine up and running with xp and md 9.2. Lilo was working fine.
I used the knx-hdinstall and didn't write lilo as it was already there with md 9.2. Problem i'm having is, i logged back into md 9.2 to add knoppix to lilo.conf
just below the main linux i added the following.
image=/boot/vmlinuz
label="knoppix"
root=/hdb5
intrid=intrid.gz
append="can't remember what i put here"
when i ran lilo after this i get an error saying can't find intrid.gz
can anyone help me out here. I tried following the config from the boot disk but i assume this is slightly different, as it didnt' work
setup is two harddrives.
hda1 windows 30gig
hda5(ithink) md 9.2
hdb1 fat32 60 gig
hdb5 knoppix 5gig
lilo is in the master boot record on hda. hdb5 is also mounted in mandrake when trying to run lilo.
Do i have to install lilo in knoppix to the hdb5 partition and point the lilo in md to that?
I'm in work atm hence lack of exact error messages. If these are required I'll post them later when i get home.
TIA
-
Senior Member
registered user
Hello, when running lilo from Mandrake, assuming your knoppix filesystem is mounted on /hdb5 and does not have a separate boot partition, the relevant lilo.conf section should be something like:
Code:
image=/hdb5/boot/vmlinuz
intrid=/hdb5/boot/intrid.gz
label="knoppix"
root=/dev/hdb5
append="can't remember what i put here"
Pay attention to the image+initrd entries, make sure these files exist, run "lilo -v" and watch out for possible error messages. But this should work, I think.
-
thanks for the quick response. I'll give that a go when i get home, and post how i get on
Cheers
-
still can't get it. Maybe someone can help me out again
here is my lilo.conf(remember its a md 9.2)
Code:
boot=/dev/hda
map=/boot/map
install=menu
vga=normal
default="windows"
keytable=/boot/uk.klt
prompt
nowarn
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
image=/boot/vmlinuz
label="linux"
root=/dev/hda5
initrd=/boot/initrd.img
append="devfs=mount hdd=ide-scsi acpi=ht splash=silent"
vga=788
read-only
image=/dev/hdb5/vmlinuz
label="knoppix"
root=/dev/hdb5
initrd=/dev/hdb5/boot/initrd.gz
append="apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi nomce"
vga=791
image=/boot/vmlinuz
label="linux-nonfb"
root=/dev/hda5
initrd=/boot/initrd.img
append="devfs=mount hdd=ide-scsi acpi=ht"
read-only
image=/boot/vmlinuz
label="failsafe"
root=/dev/hda5
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdd=ide-scsi acpi=ht"
read-only
other=/dev/hda1
label="windows"
table=/dev/hda
other=/dev/fd0
label="floppy"
unsafe
image=/boot/vmlinuz-2.4.22-21mdk
label=2422-21
root=/dev/hda5
read-only
optional
vga=normal
append=" devfs=mount hdd=ide-scsi acpi=ht splash=silent"
initrd=/boot/initrd-2.4.22-21mdk.img
Then i run lilo -v and get this
Code:
[root@localhost brian]# lilo -v
LILO version 22.5.7.2, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2003 John Coffman
Released 20-Aug-2003, and compiled at 16:45:54 on Sep 18 2003
Reading boot sector from /dev/hda
Using MENU secondary loader
Calling map_insert_data
Mapping message file /boot/message -> message-text
Calling map_insert_file
Boot image: /boot/vmlinuz -> vmlinuz-2.4.22-21mdk
Mapping RAM disk /boot/initrd.img -> initrd-2.4.22-21mdk.img
Added linux
Boot image: /dev/hdb5/vmlinuz
Fatal: open /dev/hdb5/vmlinuz: Not a directory
and lastly just for detail files for / and /boot (but not doubt someone already knows these
Code:
[root@localhost brian]# ls /mnt/hdb5
bin/ cdrom/ dvd/ home/ linboot.img none/ root/ usr/
boot/ cdrom1/ etc/ initrd/ lost+found/ opt/ sbin/ var/
cdaudio/ dev/ floppy/ lib/ mnt/ proc/ tmp/ vmlinuz@
[root@localhost brian]# ls /mnt/hdb5/boot
boot.0345 debianlilo.bmp@ sarge.bmp@ System.map-2.4.22-xfs
config-2.4.22-xfs initrd.gz sid.bmp@ vmlinuz@
debian.bmp@ map System.map@ vmlinuz-2.4.22-xfs
again thanks
-
managed to get it, forgot to set the paths according to where they were mounted in mandrake
eg. /mnt/hdb5/vmlinuz
cheers
Similar Threads
-
By purpleturnip in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 04-18-2005, 01:17 AM
-
By tomjermy in forum Hardware & Booting
Replies: 1
Last Post: 03-17-2005, 01:07 AM
-
By beetlebz in forum Hardware & Booting
Replies: 1
Last Post: 06-16-2003, 01:41 AM
-
By jochen in forum General Support
Replies: 0
Last Post: 04-16-2003, 01:04 PM
-
By knoppers in forum General Support
Replies: 4
Last Post: 01-31-2003, 05:17 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00