Hello, I am running a new computer with a primary IDE hard drive, and two SATA hard drives. When I run Knoppix 3.3 from CD, I can mount these two SATA hard drives fine. However, i did a knx-hdinstall and when I boot from the hard drive, these SATA drives won't mount. In fact, they freeze the whole machine. They *DO* still work if I boot from CD.
What could be the problem?
Here are the errors I get when I boot from hard drive and try to mount them:
hde: dma_timer_expiry: dma status = 0x20
hde: timeout waiting from dma
hde: status error: status = 0x58
hde: drive not ready for command
hde: status error: status = 0xd8
ide2: reset phy, status=0x00000113, siimage_reset
Thank you for any help!! I don't want to have to boot from CD for the rest of my life!
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Firesale HP Microserver G8 4x LFF HDs 16gb RAM 256gb SDD Os Drive
$99.00
HP ProLiant MicroServer Gen10 8GB RAM TPS-F022
$189.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$197.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
Supermicro CSE-825-7 X10DRW-i 2 Xeon E5-2667v4 3.2GHz SAS3 2U One Power Supply
$209.75
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00