Following a standard Knoppix 3.3 hard disk install the wheel on my Logitech Cordless MouseMan scrolls perfectly, but when I click it, it produces the same behaviour as the button that is under my thumb. I would like the "thumb button" to be recognised as a different button. I have checked on the web and tried the various different setups, but nothing changes.
The relevant section of my XF86config file is:
And after restarting X, I type into a console window:Section "InputDevice"
Identifier "Logitech Cordless Mouseman Wheel"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "MouseManPlusPS/2"
Option "Emulate3Buttons" "no"
Option "Buttons" "6"
Option "ZAxisMapping" "5 6"
EndSection
Which produces the following error:xmodmap -e "pointer = 1 2 6 3 5 4"
Any suggestions?xmodmap: commandline:0: bad number of buttons, must have 5 instead of 6
xmodmap: 1 error encountered, aborting.
Thanks,
Tim
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00