If you can boot with the regular knoppix cd, just use "dmesg"!
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
If you can boot with the regular knoppix cd, just use "dmesg"!
Yes I could use dmesg, but I need the capability of seeing the boot processes through the serial port. The machine that will be using this remastered version will be headless and w/o a video card.
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco ‎SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00