When i try to start Quake 3:
..loading libGL.so.1: QGL_Init: Can't load libGL.so.1 from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libGL.so.1: cannot handle TLS data
failed
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Sys_Error: GLimp_Init() - could not load OpenGL subsystem
And i found this in the NVIDIA readme:
Some versions of the glibc package shipped by Red Hat that support
TLS do not properly handle using dlopen() to access shared libraries
which utilize some TLS models. This problem is exhibited, for example,
when Quake3 Area dlopen()'s NVIDIA's libGL library. Please obtain
at least glibc-2.3.2-11.9 which is available as an update from Red Hat.
Is there any way to fix this?
And if so how?
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99