Last night I was on the tech team for a lan party at my university. They don't let us have an internet connection so its a closed network.
I ran dhcp3d and had some good results. The network was 100Mbit and about 80 computers (averaged during the 12 hours we were there).
I wanted to run bind9 and it would not serve the zone files I had configured.
I had the dhcp server on 192.168.53.1 and wanted it to be called www.com
on 192.168.53.3 was ftp.com
on 192.168.53.4 was files1.com
on 192.168.53.5 was files2.com
It seems simple but I just couldn't get it. Could somebody give me some sample zone files so I can compare them to what I had?
The servers served over 100 gigs of data (mostly ISO's for people to use). At one point disk throughput was the limiting factor from the ftp server.
On the dhcp/dns server I think something wasn't running right.
With just dhcp, cron(for webalizer logs), dns, and ssh running it was using 118 megs of ram. I also only had the required modules running. removed all of the sound modules & extra filesystem modules and it was still using quite a bit of resources. Is this normal usage?
TIA
~ryan
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCSB-B200-M4 UCS B200 M4 Blade Server NEW
$299.99