-
Realtek 8169 1000TX nic crashes boot
New user here (of linux / Knoppix).
I have downloaded and burned the CD (Ver 3.3 2-16-04) and tried booting Knoppix.
However, the boot stalls and the computer locks up at trying to get the DHCP address for le0. The screen reports "oops 0000" prints a bunch of other text (seems to be related to the next items that should load) and then crashes the interrupt handler. Only a hard reset will allow cd ejection and restart.
knoppix TestCd completes normally.
I'm pretty sure that the problem is the realtek 8169/8110 gigabit ethernet nic built into the motherboard. If I disable the nic in bios then knoppix completes the boot process and starts up fine (with the exception that the Sounblaster live 5.1 card doesn't seem to be detected (although it finds the soundblaster EMU301 portion of the hardware).
So, I need to know how i can fix these problems?
I tried to search the forums about the Nic card but only found references to the RTL 8139 , which isn't gigabit (1000TX).
Obviously the Gigabit Nic will need a driver for knoppix implemented.
In trying to figure out the Soundblaster issue it said that the driver wasn't in the kernel path, or directory. I'm not sure exactly what it said , since I couldn't print at the time. ( I have since set up the printer but I couldn't find the exact place where I got the message about the path.) I also seem to have a problem saving the configuration, but I need to get the NIc and sound working before approaching that.
Obviously I'm sending this from the windows UI.
Any help would be appreciated. thanks
Scott
The other hardware is :
Amd 2700+ processor
1gig DDR 400 Ram
Gigabyte GA N400 pro2 motherboard
TI4800SE Nvidea graphics card
Windoze XP system (Two NTFS formatted HD.s, Sony DVD/CDRW burner)
Similar Threads
-
By thelordofthechip in forum Hardware & Booting
Replies: 2
Last Post: 06-25-2005, 02:17 PM
-
By henning.scheid in forum Networking
Replies: 4
Last Post: 08-11-2004, 10:05 AM
-
By vacode in forum Customising & Remastering
Replies: 8
Last Post: 06-01-2004, 01:11 AM
-
By ruymbeke in forum Networking
Replies: 3
Last Post: 05-13-2004, 10:05 PM
-
By Pierscoe1 in forum General Support
Replies: 1
Last Post: 03-25-2004, 09:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-SX-MM 1000Base SX SFP Transceiver Module 30-1301-02
$5.99
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$314.99
Cisco w/ Green Hologram SFP-10/25G-LR-S 10/25GBASE-LR SFP28 Transceiver Module
$79.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Genuine Cisco QSFP-40G-SR-BD 10-2945-02 Transceiver Module
$15.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00