I´m sorry for my spelling mistakes. But i guess you can say that my engish is poor.
Dick.
Hi!
I have a Packard Bell iConnect 8003 and KNOPPIX hangs almost directly after start. I have tryed several codes but nothing works. Any one with this problem?
Best Regards Dick.
I´m sorry for my spelling mistakes. But i guess you can say that my engish is poor.
Dick.
did you check if you had a correct iso of the distribution ? (using the md5 file)
Yes I have it md5ed and I have tryed to boot from floppy. And the iso boots fine i Bochs. It hang after ok now boot.. with knoppix 2 vga=normal. And no bitmap when syslinux starts.
Dick
Are you using any "removable" drives, like Zip or Tape? Load the media, Disk, Tape, etc. and see how things work.Originally Posted by sm6una
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL POWEREDGE R730 2X E5-2650 V4 320GB RAM NO HDD
$699.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R720xd Dual Intel Xeon E5-2660 v2 @2.20GHz 128GB RAM No HDD H710P
$249.99
DELL POWEREDGE R730 2X E5-2650 V4 320GB RAM NO HDD
$699.00
Dell Poweredge T430 8 Bay Server Dual Xeon E5-2683 V4 32 Cores 64GB DDR4 2X SSD
$799.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 128gb 4x Trays 2x 550w
$364.99