-
HDD install problem - Error 0x07 using LILO from boot disk
I am trying to do a knoppix hd install on an xp machine. I put in
a 2'nd hard drive so I could keep xp on its own disk. I formatted
the new drive as follows using cfdisk:
primary partition: 50 MB
logical: 3000MB
logical: 500MB
logical: 1000MB
I then did the knoppix install choosing to install lilo to partition instead
of master boot record. I created the boot disk. Rebooted computer
and when I select linux, or linux on hdb (i have 2 options for linux boot
on the menu - I assume they do the same thing) I get the following:
boot: Linux
Loading Linux
Error 0x07
Windows still boots ok with and without the boot disk.
Any help would be appreciated. I can cd to those directories on the
2'nd hard drive when I boot knoppix from the cd and it looks like
things were setup ok.
Brian
-
Senior Member
registered user
Please post your /etc/lilo.conf
BTW, if you put Lilo on the Linux drive, don't you have to tell the bios to boot from that drive?
-
I will have to wait until I get home to get the lilo.conf data.
I guess I was thinking if I am booting from the floppy I don't
have to tell the bios to boot from the hard drive - I thought that
was what the bootable floppy was for.
I do have one question - does the parition in which knoppix is
installed in have to be marked as bootable? I was thinking it
didn't if I was using the bootable floppy.
I did make one of the paritions on the 2'nd hard drive (where knoppix
is installed) bootable but there is nothing there currently - knoppix
was installed in the other partition.
Thanks for any info
Brian
-
Found the problem. I didn't realize this was really a lilo question.
Problem was new hard drive. Needed to turn on in bios. Thought
this was automagic since when I booted into windows (before
reformatting the drive) the drive showed up. :P
Similar Threads
-
By segway in forum Hardware & Booting
Replies: 10
Last Post: 06-22-2005, 04:24 PM
-
By ocean in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 10-01-2004, 01:26 PM
-
By keava in forum General Support
Replies: 3
Last Post: 10-20-2003, 05:24 PM
-
By Sebastian in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 05-22-2003, 05:06 PM
-
By fm78 in forum Hdd Install / Debian / Apt
Replies: 13
Last Post: 03-13-2003, 09:44 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM
$99.99
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX2300 -24P 24 Port Gigabit PoE Network Switch
$149.00
Juniper Networks SRX345 Service Gateway 8 Port Gigabit 8 SFP 1G
$229.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Ethernet Switch EX2200-C - 12 Port Switch
$89.99
Juniper QFX5200-32C-AFO QFX5200 32 Port QSFP 40/100G AFO Front to Back Airflow
$1349.00
Juniper Networks EX2300-24P -Port 10/100/1000BASE-T PoE+ Ethernet Switch
$99.99