Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Knoppix version 2003-06-17
P3 866MHZ
128 MB Ram
15GB HD
On board intergrated Video/Sound/NIC
Compaq DeskPro EN
Initially I completed the entire installation and then recieved the KNOPPIX HALTED meesage, remove cd and then power down. Now Im getting errors such as invalid IO or IRQ input, or cannot start KMSERVER etc, I can run this cd or the one burned at slower speeds x4 etc and install fine on other machines, just curious if there is anything I am missing here to run on this box?
Also at Initiating shutdown sequence wav I see:
*Error* Cannot initialize the agpgart module
Cannot allocate memory
INSmod i810 failed etcetc
Grazie~
Warawara
Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Thanks, I appreciate the response, I'm getting the 3.3 version atm, will attempt install again here shortly.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00
Dell PowerEdge M620 Blade Server
$39.99