Just realised I was using a sept/02 version. Sorry didn't know so much has changed, now downloading 12/11/02.
Well I followed the hard drive install, and it went for the most part as expected, (Libranet being my only other debian install experience).
What I found unusual, is after the initial boot to kde and the language conversion, I then needed to run ppp0econf to connect my adsl modem, this I found could only be done as root, my sound only worked as root, and my printer only configured as root, but no provision was made to log me in as regular user, only a knoppix user. Nothing of course worked as a knoppix user, and my windows partition was not set up or recognized on install, not even grub picked it up.
Now I am familiar with setting this all up, it's just that I was not prepared to spend so much time doing things that should have been looked after on install. Or at the very least given the opportunity to configure during the install process. The install is the weakest link.
To make a long storey short, it feels and drives nice, but needs far too much manual adjustment for basic things after install.
It works much better as it's intended use, a demo disc. I had no trouble configuring anything.
Nice job so far I'll keep an eye for updates.
Just realised I was using a sept/02 version. Sorry didn't know so much has changed, now downloading 12/11/02.
Pretty much the same results. I don't understand how the demo detects windows partition, both cd drives, and I can pppoe to the internet, off the demo side. I also notice the hardware detection is bang on the money.
Now install it to the harddrive, and it all goes to hell in a handbasket, and to make it worse you go to edit /ppp/chapsecrets and other config files , and they are in german.
I will stick to libranet.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | 32GB | P244BR | 2x300GB 15K
$279.00
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FC430 Blade with 2 x Xeon 2680v3 CPUs
$165.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00