Note if you have problem with QTParted. I was using qtparted to make a new partition and it appeared to succeed. Anyhow, when I
rebooted, the computer would not reboot past the logo and I could not access bios adjustments nor would floppy or dvd/cd drive able to access. If you have this problem I found that the only way to get back into the hard drive was to remove the data ribbon cable from the hard drive and then put in the winxp disk and/or linux disk to make repairs. After the repair or rescue comes up, plug back in the data cable and you should be able to write to the hard drive. (I know, you're not supposed to plug in ribbon cable with power on) but what was I to do? Keep in mind that the floppy and dvd/cd drives would not be recognized. Good luck and I hope this helps someone.
pgk
Vintage DEC/CLEARPOINT INC. -QRAM-2 SAB-1 1MB Q-BUS MEMORY MSV11-QA (B2)
$129.99
Vintage DEC/The Redac mini cabinet front panel Digital Equipment Corp. 19"
$269.99
DEC PDP 8/M PDP 8M / 4 avail / Vintage Digital Equipment Corp /Also DEC PDP 12
$5775.00
DEC DIGITAL Equipment Corp VT220-D2 Vintage CRT Terminal
$215.00
10x Rare Vintage DEC 12-22246-01 VAX BI TRANSITION HEADER ALL 3 BLOCKS INSTALLED
$209.98
Vintage DEC Digital Equipment VT100 Keyboard 70-14653-11 Missing Key Caps
$103.20
Vintage DEC / DIGITAL CLEARPOINT INC COMPUTER BOARD QRAM-11 QBUS Memory PQ
$109.00
$47.00
VINTAGE DEC Digital RK11-D DISK CONTROL M7255 PDP 11 (B1)
$129.99
VINTAGE DEC Digital DV11 DISTRIBUTION PANEL 5411153
$189.99