Try booting up your system with knoppix cd using the cheat code:
Then find the /etc/X11/XF86Config-4 in the knoppix ramdisk. Copy and replace over this file to where your HD knoppix is install. /mnt/hdaX.Code:knoppix screen=1600x1200
I have installed Knoppix 3.4 with 2.6 kernel, which unlike 2.4, detects my network card. The screen is UXGA (1600x1200) and uses an ATI Radeon 7500 64meg video card. The HD install does not properly detect the video card and defaults to a "basic" card plus a screen with no more than XGA resolution. I have tried changing the XFree86-4 file to include 1600x1200 as default but with disastrous results as it causes the installation to not reboot properly , requiring a complete re-install. Can anyone help?
ps Unlike previous versions of Knoppix the installation does not shutdown properly - ever. Other than that and problem with screen and video detection it is really good.
Try booting up your system with knoppix cd using the cheat code:
Then find the /etc/X11/XF86Config-4 in the knoppix ramdisk. Copy and replace over this file to where your HD knoppix is install. /mnt/hdaX.Code:knoppix screen=1600x1200
Thank you! I did just that, and it worked just fine! No just the shutdown problem left...
Cisco w/ Green Hologram SFP-10/25G-LR-S 10/25GBASE-LR SFP28 Transceiver Module
$79.99
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1)
$39.95
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
New Cisco SFP-10G-LRM 10G SFP+ LRM 1310nm 220m SMF/MMF LC Module
$34.99