If you can boot with the regular knoppix cd, just use "dmesg"!
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
If you can boot with the regular knoppix cd, just use "dmesg"!
Yes I could use dmesg, but I need the capability of seeing the boot processes through the serial port. The machine that will be using this remastered version will be headless and w/o a video card.
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$93.24
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
TP-Link TL-SG1008D 10/100/1000 Mbps 8-Port Gigabit Desktop Ethernet Switch.
$10.00
Cisco WS-C2950-24 Layer 2 Switch 24-Port 10/100 Catalyst 2950 Series
$25.00
Netgear GS110TP ProSafe 8Port Gigabit Smart Switch w/ PoE & Fiber Uplink
$39.95
HP ProCurve 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A TESTED
$30.70
TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch
$50.00
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97