When i try to start Quake 3:
..loading libGL.so.1: QGL_Init: Can't load libGL.so.1 from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libGL.so.1: cannot handle TLS data
failed
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Sys_Error: GLimp_Init() - could not load OpenGL subsystem
And i found this in the NVIDIA readme:
Some versions of the glibc package shipped by Red Hat that support
TLS do not properly handle using dlopen() to access shared libraries
which utilize some TLS models. This problem is exhibited, for example,
when Quake3 Area dlopen()'s NVIDIA's libGL library. Please obtain
at least glibc-2.3.2-11.9 which is available as an update from Red Hat.
Is there any way to fix this?
And if so how?
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R210 II Server Xeon E3-1220 v2 3.1ghz Quad Core / NoRam / 1x Tray
$69.99
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
DELL PowerEdge R730 16SFF Server 2x E5-2690v4 =28 Cores No RAM/ HDD H730 4xRJ45
$232.97
Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz 32gb H330 2x 3.5" Trays SVR 2012
$189.99
R630 DELL OEM 10X2.5'' 2X E5-2660V3 32GB RAM 2X750W PSU SERVER POWEREDGE
$159.95
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$279.99
Dell Poweredge R730xd 3.5 2x E5-2683 v3 2.00ghz 128gb H730p 18x Trays 2x1100w
$689.99