Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Hi all;
Newby to Linux and Knoppix here - firstly, my apologies for lack of any Linux knowlwdge! (I do run a few ported Linux progs though, Lyx, Mozilla etc.)
Anyway - I've just found Knoppix on CD and have had a bit of a play. So far so good.....however;
1. I cannot connect to my LAN - DHCP does not pick up any IP addy. In Windoze i just select "obtain an IP address automatically" and it does.
2. I see that Lyx 1.3.4 is shipped with the Knoppix CD and would like to give it a go. Question is how does one "run" a program that does not appear(AFIK) on the start menu?
Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Yep; I tried to manually configure with known IP, Gateway etc but still no joy
I've sorted it - of sorts
I have an on board LAN card that I use for a interanl home network and a PCI Netgear FA311 card which I use for external network connection
Knoppix + FA311 = No connection
Knoppix + onboard = All works fine
No idea why but I'm happy
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen10 8GB RAM TPS-F022
$189.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$197.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
Supermicro CSE-825-7 X10DRW-i 2 Xeon E5-2667v4 3.2GHz SAS3 2U One Power Supply
$209.75
HPE ProLiant MicroServer G10 v2 16GB Ultra Micro Tower Server P54644-001
$550.00
SuperMicro 842-6 | X10SRL | 4U Chassis Server | E5-1620 V3 | 32GB Ram. No HDD
$99.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00