You could try:
1) create a script and place it in /etc/init.d and create a symlink to that script using : update-rc.d scriptname defaults
or
2) add your line in /etc/sysconfig/harddisks. Create one if it isn't there.
I am a neophyte to Linux who recently successfully did a hard drive install of Knoppix 3.4 on my old computer after wiping off all evidence of Windows. Now I am trying to optimize my hard drives. As root, I can successfully execute commands like “hdparm –X66 –d1 –u1 –m16 –c3 /dev/hda”, but of course they are gone when I reboot. I have tried appending that line to /etc/init.d/bootmisc.sh" and rebooting, but this was unsuccessful in that the hard drive settings were still unchanged.
This all may be related to the fact that I had to initially install Knoppix using the cheatcode “nodma” because my CD ROM doesn’t support DMA. So now as it boots up I get a message something like “Skipping DMA acceleration as requested by command boot line.” Any suggestions on how to proceed to get my hard drives automatically optimized will be greatly appreciated. Thank you.
You could try:
1) create a script and place it in /etc/init.d and create a symlink to that script using : update-rc.d scriptname defaults
or
2) add your line in /etc/sysconfig/harddisks. Create one if it isn't there.
If you want to remove the 'nodma' startup code, just remove it from the append line in /etc/lilo.conf & rerun lilo.
Removing the "nodma" command seems to be all it took. Now it is working much better. Thank you. :)
lyonh,
I have a similar, but in reverse, problem as in your case. I have found that the nodma cheatcode, either in the Live CD, or after I installed v3.4 onto my hard drive, the append= line... I have been using the experimental 2.6.6 kernel, though...
I have two hard drives, a CD-RW, and a DVD device, as peripherals - my second hard drive is the concern, it cant handle DMA, whereas, all the other devices, can... The nodma has never worked, and I had to resolve the issue by adding hdparm commands for all the devices into the bottom of my bootmisc.sh file - to ensure that dma is being set to what I need... i.e. hdparm commands for "setting" dma on all devices, except the second hard drive, and then a hdparm command for disabling the dma on the second hard drive.
From what I can tell, with the 2.6.6 kernel, some cheatcodes, or the append= codes, dont have any effect, while certain ones do. Appears that "tweaking" your system with the 2.6.6 kernel, is not as important as it was in previous releases, I guess, evident by the inability to alter options on the boot, as in previous. Or, these options were added so quickly into the 2.6.6 kernel, that "back-end" code was not inculded to use them yet, I dont know...
Oh well, glad you got it working
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$300.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$279.99
Sun Oracle Sun Fire X4170 M2 w/ Xeon E5620 CPU - 16GB RAM - No HDD/SSD or OS
$119.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD
$119.00
Dell R630 Server 2x E5-2650 V4 = 24 Cores 64GB DDR4 2x 1Gb 2x 10Gb RJ45 iDRAC8
$262.00
HP DL360 G10, 2x 16/20/22-core CPUs, 128GB - 768GB RAM, *1.92TB SSDs
$3190.00
R630 DELL OEM 10X2.5'' 2X E5-2660V3 32GB RAM 2X750W PSU SERVER POWEREDGE
$159.95