See my post #3 at:
http://www.knoppix.net/forum/threads...ht=persistence
Using Knoppix 6.4 I installed to hd from the Knoppix HD Install link under Preferences. All is working fine other than I cant get it to save changes. During setup there was no option for configuring save changes. Can someone give me directions. Thanks greatly!
See my post #3 at:
http://www.knoppix.net/forum/threads...ht=persistence
... you did "HD Installation", did you? Then you have a Debian like installation. It isn't an installation of Knoppix with compressed filesystem image and additional persistent memory.installed to hd from the Knoppix HD Install link under Preferences
Your Debian like Knoppix installation works as any other distribution - Debian, Ubuntu, openSUSE, Mandriva and so on.
@ itman007
Please excuse my error; my comments apply only to the LiveUSB situation.
Yes I did use the Install to hd link thats within the prefrences menu of the live dvd. I assumed the install of this manor would keep changes. To my suprise after installing and configuring a reboot wiped out all my changes.
... please start your "Install to hd", type in a terminaland post the output and also the output fromCode:df -hGreetings Werner * http://www.wp-schulz.de/knoppix/summary.htmlCode:blkid
Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
Last edited by Werner P. Schulz; 07-11-2011 at 04:06 PM.
Sorry fo rthe delay!
knoppix@Microknoppix:~$ su
root@Microknoppix:/home/knoppix# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 19G 8.6G 11G 45% /
/dev/root 19G 8.6G 11G 45% /
tmpfs 2.0G 8.0K 2.0G 1% /tmp
udev 20M 364K 20M 2% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
root@Microknoppix:/home/knoppix# blkid
/dev/sda1: UUID="30c9b7ea-45d2-42d5-b27b-cb4b4e25d251" TYPE="swap"
/dev/sda2: LABEL="XPOS" UUID="25CA52804E148827" TYPE="ntfs"
/dev/sda3: UUID="7559c1a2-cc62-415c-8687-71b08891c43c" TYPE="reiserfs"
/dev/sdb: LABEL="XP_Freeze" UUID="25CA52804E148827" TYPE="ntfs"
/dev/sdc1: LABEL="KINGSTON" UUID="F4A4-243D" TYPE="vfat"
root@Microknoppix:/home/knoppix#
... ok, you have real a HD Installation of Knoppix on /dev/sda3. Therefore I cannot understand, what you mean withWhat had been "wiped out"?To my suprise after installing and configuring a reboot wiped out all my changes.
But what's about /dev/sdc1? Is there also a Knoppix installation? Perhaps flash disk installation?
Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
Once booted to Knoppix I install webmin and nic drivers. But these are to reinstall every time the pc is rebooted. I again have to reinstall webmin and nic drivers. Knoppix doesnt save my changes. Does this help understand? Knoppix is only installed on sda3. Windows on sda2 which works and another version of windows on the second hard drive sdb, which will not boot. I select it at the grub menu but no luck.
... how did you install "webmin and nic drivers"? I cannot found those with aptitude.
And please read Warning.
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.00
Open Eye OE-MTX08 8TB Micro Server With Linux (Boots To Login) No Accessories
$282.92
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD
$119.00
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00