-
agppart module..
hi..
i use knoppix3.3 ..after booting ..when it stats Starting X11..it gives following error:
Starting X11 [drm:drm_init] *ERROR * Cannot initialize the agppart module
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: init_modules: Cannot allocate memory.
Hint: insmod erroe=rs can be caused by incorrect modules parameters.
You may find more info. In syslog or the output from dmesg.
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: insmod /lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: failed.
wht is mean by this & why this error occured?
though X server starts after that & everything works fine.
thankx.
-
Senior Member
registered user
I also was getting this error with knoppix 3.3 & with 3.4 using the 2.4 kernel (also i810 vid card). Switching to 3.4 / 2.6 kernel fixed it.
Agpgart has to do with video card acceleration, I could not use graphics-intensive applications like tuxracer until it was working.
-
IIRC I had the same memory problem with Knoppix 3.3 and i810, and solved it by adding a line for more video memory in /etc/X11/XF86config-4 :
Code:
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
VideoRam 16384
EndSection
-
Senior Member
registered user
I have also added video memory but still the agpgart module will not initialize unless I use the 2.6 kernel.
-
Hmm, makes me wish I'd remember what I did to make tuxracer run on 3.3. Wasn't there 3 different i810 display adapters to choose from, but only one worked (after adding memory). Easier to try a newer version of knoppix though.
Similar Threads
-
By madmadmod in forum Customising & Remastering
Replies: 0
Last Post: 01-15-2005, 05:14 PM
-
By Jansi in forum General Support
Replies: 0
Last Post: 08-06-2004, 02:45 PM
-
By MrAhmad in forum Customising & Remastering
Replies: 1
Last Post: 09-06-2003, 11:45 AM
-
By corwinspyre in forum Hardware & Booting
Replies: 1
Last Post: 08-15-2003, 08:38 PM
-
By Myrdhin in forum Customising & Remastering
Replies: 2
Last Post: 08-01-2003, 02:54 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
LOT OF 8 Grandstream GXP2135 8 Lines Bluetooth Enterprise VoIP Phone DRC4-10w
$149.99
LOT OF 4 Grandstream GXP2135 8 Lines Bluetooth Enterprise VoIP Phone URSB-17w
$79.99
Grandstream DP720 10 SIP Accounts Full HD Audio Dect Cordless VoIP Telephone
$24.44
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Polycom VVX 411 IP VOIP POE Gigabit Telephone [L/N]
$24.99
Cisco CP-8861-K9 5-Line VoIP Business Phone w/ Stand & Handset
$24.98
Yealink SIP-T53W T53W IP Phone, 12 VoIP Accounts. 3.7" Graphical Display, Black
$51.08
Cisco CP-8841 VoIP Phone - Black
$20.00