-
my modem is stuck in "initializing"
hi everyboy, quite new to all hi , so im using the knoppix 3.7 and i like it but i just cant get it to connet to the internet, i have
identifie my modem and done the configurations as i think they should go but i just cant get it to work, it start and everithing
but as it initializes it just gets stuck there for ever and i cand igure it out, can anyone out there help me out with this or any
one whos had a similar problem i have an internal Agere Systems PCI Soft Modem and using a Compaq Presario SR1110NX,
hope any one can help
-
Senior Member
registered user
i have identifie my modem and done the configurations as i think they should go but i just cant get it to work,
What did you do - installed driver or setup kppp? People usually think that by kppp setup modem will work. You can also try Mepis or Kanotix - they have integrated suport for some modems, maybe your modem is suported without any drivers etc.
Kurumin as well - it is on portuguese only, based on Knoppix and Kanotix - I don't speak portuguese but I use Kurumin, it is so good! I hope you understand port. better than I? It has a planty of help, explanation and everything. Please, visit its site Kurumin
-
well it used the kppp to set up the conection but it just wont get it, i also tried with DSL but got the same results, is there a wy to put the modem diricer in the iso?
-
i getting the kurumin, by any chance do you know of a cheat to change the language or can it be change with the dsktop wizard that changes the whole thing just like in knoppix?
-
Senior Member
registered user
Originally Posted by
chatoloco
well it used the kppp to set up the conection but it just wont get it, i also tried with DSL but got the same results, is there a wy to put the modem diricer in the iso?
As far as I know, there is NOT drivers for winmodems in Knoppix in ISO. So, kppp can't help much without drivers.
I didn't try to change language in Kurumin. It has meny scripts to help user to setup many things, and this is a big problem for translation. For now, it is only in portuguese as a system, maybe you can change language for some aplication (Open Office?), realy don't know.
-
thanks., for now ill keep tring to see wasup with tehm kppp, i read in a manual that it seems that even when knoppix has a lot of software deteccion that the modems is one that as fallen behind,
Similar Threads
-
By big_linux_geek in forum Hdd Install / Debian / Apt
Replies: 10
Last Post: 06-19-2005, 09:08 PM
-
By Download-This in forum General Support
Replies: 6
Last Post: 08-18-2004, 06:36 PM
-
By panthrax in forum Hardware & Booting
Replies: 2
Last Post: 12-11-2003, 11:39 PM
-
By mark_53 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 12-08-2003, 05:50 PM
-
By FarAway in forum Networking
Replies: 2
Last Post: 05-14-2003, 10:29 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
Supermicro SYS-5019P-M Server Xeon Scalable 6138 20 Cores 40 Threads 48gb DDR4
$330.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.00
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVESorCads
$200.00
CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD
$119.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$314.00