-
Inexplicable emergence of boot error msg: but nothing else has changed!
Have been using 8.6.0 on a 32G FAT32 boot stick since forever.
Seamless. Perfect every time. No glitches.
The stick has one partition showing as /dev/sda1. (The host HD is /dev/nvme0n1..)
There is no additional partition /dev/sda[234].
Just lately red script caught my eye during the boot process.
The message vanishes so rapidly I had to video the boot process to catch it.
I get AS USUAL:
Knoppix 8.6 found at /dev/sda1
>>> Starting lin Live-Mode
>>> Please do not remove medium until shutdown!
But this is NEW:
Using /dev/sda3 (rw) [in yellow]
mount: mounting /dev/sda3 on /KNOPPIX-DATA failed: No such device
sb: Used: bad number
Overlay /KNOPPIX-DATA: partition s too small (<400M) [in shocking red]
Can anybody explain this? I repeat: there is no sda3 (or 2 ; or 4).
It looks as though mounting sda3 is part of some hardwired boot script fragment, but this has not occurred before.
Or confirm my only theory so far: the stick is on its way out and notwithstanding a clean report from all of
fdisk -l
dosfsck -r
chkdsk /f [in Windows]
it should be replaced.
But it would ne nice to KNOW, not merely GUESS.
Thank you!
-
Press Ctrl-Alt-F1 and you can see the boot messages (on tty1), no need to make video. To return to X (tty6): Alt-F6.
If your stick has only 1 partition, then the PC should have the "sda3". Otherwise, when you run KNX from a stick, the stick part. will be sdb and the hosting PC part. sda (if the stick and PC has only one-one drive with one-one part.).
You can use various commands to get detailed information: lsblk, lsusb, blkid, parted -s /dev/sdX p (where X can be a, b, c...).
After that, study the /init script which purpose is:
# 1. Mounting CD, DVD, Flashdisk or network drive,
# 2. unifying read-only compressed file system and ramdisk or file overlay,
# 3. give control to the real sysv init, which then continues to work like
# we booted from a single disk partition.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R620 2x E5-2680 2.7ghz 16-Cores / 128gb / H710 / 2x Trays / 750w
$199.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$240.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$289.99
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$144.99
Dell R730xd 26 Port SFF 2x E5-2640v3 16-Cores H730 64GB RAM Server
$694.00
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell PowerEdge R720xd w Rear Flex- 256Gb RAM, 2x8c CPU, 2x450Gb/6x900Gb, Proxmox
$420.00
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$478.00
Dell PowerEdge R630 Server 2x E5-2690v4 2.60Ghz 28-Core 128GB H730 Rails
$634.45