hi all
A week ago i just got a new sata disk, so i have installed version 4.0 with which i am very happy.
today i tried to DD the partition just to save it. I boot from another ide hdd where i have version 3.6 and run(the sda1 disk was not mounted)
dd if=/dev/sda1 of=/home/conan/save/zaloha.file
but after one hour it stopped with info that i do not have more space to save.
so i boot again from sata disk the 4.0 version and run
dd if=/dev/sda1 of=/dev/null
370233927+0 records in
370233927+0 records out
189559770624 bytes transferred in 3332.174483 seconds (56887708 bytes/sec)
my question is, why it record so much giga, when my disk is full only from 5% - 8GB
i hope it is not because, i have created by mistake a swap disk 10gb instead of 1gb.
thankx for advice
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$288.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 Server Blade 2x Intel E5-2660v3 256GB RAM NO HDD
$194.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.80
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
Nice used Cisco. UCS B440 M2 blade chassis parts or repair
$100.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$284.00
Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730
$449.99