You can't. You needed to boot it up as you wanted it then install. See this post
esher2292
I just ran the knoppix-installer for my HP Pavilion ZX5040 Notebook,
I had to boot the cd Knoppix 3.4 with
linux26 noscsi nousb noapm noapic nodde
otherwise it would get past the Looking for CDROM ..?
(FYI Knoppix 3.3 boots fine without cheat codes.)
I installed Grub and would like to know how to pass cheatcodes?
Thank you,
Mark
You can't. You needed to boot it up as you wanted it then install. See this post
esher2292
That post sys that you need to have the boot options just as you want, for knx2hd?
What I missed to state was I was using the
knoppix-install on 3.4 to partition and install as a basic debian system.
I also found how to pass boot options in gub manually
root (hd0,0)
kernel /boot/vmlinux-2.6.5 lang=us
inited /boot/initrd-2.6.5
boot
I am not sure if all cheatcodes work? Also funny thing was I foudn that the nodma I needed when booting the cd-rom directly on this laptop was not needed when installed on the harddrive. I said to myself that maybe the cdrw/dvdr drive would not work, but it did. (I saw DMA enabled on the drive as it booted.)
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$109.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$13.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.57
Western Digital 8TB Certified Refurbished My Book Hard Drive-RWDBBGB0080HBK-NESN
$119.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95