-
Knoppix on Toshiba Skullcandy freezes after a few seconds
I'm trying to run Knoppix on a Toshiba Skullcandy laptop (2015 model). It has an AMD A8 processor and Radeon graphics. 'knoppix64 no3d' causes it to boot OK and get to the graphics screen, but after a few seconds everything freezes and only a forced power-off works. Does anyone have Knoppix working on this kind of system ? Am I missing a cheatcode, and if so which one ?
Things run OK if I boot with 'knopppix64 2', but obviously I don't get a GUI that way and that's no use to me.
'knoppix64 no3d failsafe' also hangs after a few seconds.
Thanks for all help anyone can give !
Chris Ward
-
Senior Member
registered user
Hi, and welcome to Knoppix!
Run upto init 2 and install a specific proprietory AMD Radeon linux driver for your graphics processor.
After installation, restart, and you will hopefully have the GUI.
And from the next time, please post detailed spec data for us to help.
Last edited by rajibando; 06-12-2015 at 12:54 PM.
-
Junior Member
registered user
Originally Posted by
rajibando
Hi, and welcome to Knoppix!
Run upto init 2 and install a specific proprietory AMD Radeon linux driver for your graphics processor.
After installation, restart, and you will hopefully have the GUI.
And from the next time, please post detailed spec data for us to help.
Last time I booted, I waited about 15 minutes and everything 'unfroze'.
What detailed spec do you want, how do I find it, and how do I set up the appropriate AMD Radeon linux driver ?
-
Senior Member
registered user
Not so many questions at one time
Let's take things step by step.
Are you familiar with Linux? ... Knoppix?
Take out those papers you received from your vendor when you bought that laptop.
There will be detailed info about your Graphics Card's make, every single detail.
Go to AMD website and search for the appropriate linux driver file.
Download it. Save it where it is going to last really long.
Then use 'knoppix64 2", the one your wrote as cheatcode.
Once reached there, type and go to where you saved the driver, at the terminal.
Run the file.
Follow the instructions displayed by the driver while installing.
After it's over, you could try startx.
See what happens.
If the graphics is okay and the system works, restart and make a persistent image.
You have to install the driver over again if you didn't have a persistent.
Follow all instructions on Knoppix website meticulously.
Good luck!
-
Originally Posted by
chris-ukl
Last time I booted, I waited about 15 minutes and everything 'unfroze'.
What detailed spec do you want, how do I find it, and how do I set up the appropriate AMD Radeon linux driver ?
Why do you capture someone else's thread?
Last edited by Werner P. Schulz; 06-12-2015 at 09:33 PM.
-
Junior Member
registered user
Sorry, I seem to have 2 user-ids on knoppix.net. I am tjcw01 and chris-ukl.
-
Therefore I suggest, to purge your newer registration to avoid further confusions or shall I purge your registration from 2005?
-
Which Knoppix version CD or DVD are you using? 7.4.2 or 7.5?
Originally Posted by
tjcw01
I'm trying to run Knoppix on a Toshiba Skullcandy laptop (2015 model). It has an AMD A8 processor and Radeon graphics. 'knoppix64 no3d' causes it to boot OK and get to the graphics screen, but after a few seconds everything freezes and only a forced power-off works. Does anyone have Knoppix working on this kind of system ? Am I missing a cheatcode, and if so which one ? Things run OK if I boot with 'knopppix64 2', but obviously I don't get a GUI that way and that's no use to me. 'knoppix64 no3d failsafe' also hangs after a few seconds. Thanks for all help anyone can give ! Chris Ward
Which Knoppix version CD or DVD are you using? Knoppix 7.4.2 or 7.5 or 7.4.1? Get the most recent version that you can obtain and let us know what happens.
-
Junior Member
registered user
Please purge the 'tjcw01' registration
-
New laptop, new Knoppix version 7.4.2 and 7.5.0
- hi Chris!
- Knoppix 7.4.2 and 7.5.0 work great on a new laptop, 2015, like you have.
- Have you checked the case for dust? I've had problems with laptops gettting too hot and start acting contrary.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro CSE-825-7 X10DRW-i 2 Xeon E5-2667v4 3.2GHz SAS3 2U One Power Supply
$219.75
FOR PARTS - HPE ProLiant MicroServer Gen10 Plus Server
$199.95
HP Proliant MicroServer Gen8 Xeon E3-1220L V2 2.30GHz CPU 16GB RAM *No HDD*
$149.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
SuperMicro Server E3-1230v6 X11SSL-F 32GB RAM (2x16GB)
$150.00
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75
SuperMicro 815-7 | 2x Xeon Gold 6128@3.4GHz | 128GB RAM | 2x PSU *NO OS/HDD*
$497.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00