-
Help a Noob
Hello I am new to Knoppix it was suggested to me by a friend... The interface seems excellent. I just seem not to be able to connect to the web. I can get my Modem to connect to with Kpp just fine my problem is setting up Netcardconfig.. how do i come up with the correct gateway ip and nameserver.. and the rest of the values that go into netcardconfig? Is there a command that i can run to get me the correct ip's?
Thanks in Advance..
-
Senior Member
registered user
Re: Help a Noob
Originally Posted by
_StREAk_
...I am new to Knoppix... I just seem not to be able to connect to the web...
Don't worry, we were all n00bs at least once. While I probably can't help you directly, there are some things you can tell us to make things easier:
1. Which version of Knoppix are you running?
2. More about your hardware. Which modem are you running? As suggested for the Hardware forum: "Please post a full output of lspci -v if your hardware is not detected, and all relevant information about your hardware."
That should help you get started. Good luck and welcome to Knoppix. I think that you will find it worth the effort.
-
Senior Member
registered user
You need to use the same settings that you would normally use when connecting in windows. Go into the control panel under networking and copy them down and then you have the settings you need. Or use the run command and winipcfg (I think thats right) and get the settings from there. If you did not have to enter any of the settings in windows then you are most likely using DHCP to get the settings so just use this in netcardconfig.
Similar Threads
-
By newpants2003 in forum MS Windows & New to Linux
Replies: 1
Last Post: 03-04-2005, 08:08 PM
-
By cannonfodder in forum General Support
Replies: 14
Last Post: 02-11-2005, 04:49 AM
-
By shiv_379 in forum MS Windows & New to Linux
Replies: 1
Last Post: 01-15-2005, 09:48 PM
-
By Guitarplaya512 in forum General Support
Replies: 2
Last Post: 03-02-2004, 04:57 AM
-
By waynejkruse10 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 10-23-2003, 01:53 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$313.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$509.99
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$125.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
DELL PowerEdge R430 8SFF 2x E5-2640v3 2.6GHz =16 Cores 32GB H730 4xRJ45
$208.00