-
I have some questions
I'm a newbie to Knoppix. I installed it to HD a couple of weeks ago, and I find it a lot nicer than windows. But I have a few problems with it. I have a Toshiba Tecra S1, the 1.3 ghz one, with 256MB of RAM.
First, I have a Belkin wireless notebook network card F5D7010xx (that's what it says on it). If I put it into the PCMCIA slot, when I boot to Knoppix, it doesn't do anything. The activity lights don't come on either. How can I fix this? Sorry if there's some sort of command I have to use, but as I say, I'm a newbie. In the meantime I've been using the built-in wireless. But my PCMCIA card is slower than the built in.
Secondly, when I use my built in wireless, I can't pick up my server. It doesn't have a built in wireless card; it has a Belkin wireless desktop network card F5D7000uk. Which is 802.11g. The wireless in my laptop is 802.11b. I don't think it's because of compatibilty with the different standards, number 1, the wireless desktop card is backwards compatible. And number 2, when I use the built-in wireless with the server, it works fine, it connects at 11MBPS. I think it might be because my server is running on Windows XP Service Pack 2, which is incredibly mega picky about security. The only way to conect to my server is to have the server connect to my access point (again Belkin, a wireless network access point F5D6130u). That's 802.11b.
I have quite a few problems. My next one is that I can't get my microsoft optical notebook mouse (this was bought when I hadn't yet discovered Knoppix) to work. It gets power; the LED on the bottom is working. But the cursor doesn't move and I can't scroll using the scrol wheel. I tried the modprobe command with various different arguments, with no avail.
In the control center thing for power controls, first of all, it completely ignores my settings for standby after a certain amount of time etc. And on the 'laptop battery' sub-bit, it complains about my computer having a partial ACPI configuration, and that I need to rebuild my kernel. *worries*. I looked into rebuilding Llinux kernels, it looks scary. Is there any easy way to fix this?
Thanks in advance.
-
Senior Member
registered user
Re: I have some questions
Originally Posted by
ichi
I'm a newbie to Knoppix. I installed it to HD a couple of weeks ago, and I find it a lot nicer than windows. But I have a few problems with it. I have a Toshiba Tecra S1, the 1.3 ghz one, with 256MB of RAM.
First, I have a Belkin wireless notebook network card F5D7010xx (that's what it says on it). If I put it into the PCMCIA slot, when I boot to Knoppix, it doesn't do anything. The activity lights don't come on either. How can I fix this? Sorry if there's some sort of command I have to use, but as I say, I'm a newbie. In the meantime I've been using the built-in wireless. But my PCMCIA card is slower than the built in.
Secondly, when I use my built in wireless, I can't pick up my server. It doesn't have a built in wireless card; it has a Belkin wireless desktop network card F5D7000uk. Which is 802.11g. The wireless in my laptop is 802.11b. I don't think it's because of compatibilty with the different standards, number 1, the wireless desktop card is backwards compatible. And number 2, when I use the built-in wireless with the server, it works fine, it connects at 11MBPS. I think it might be because my server is running on Windows XP Service Pack 2, which is incredibly mega picky about security. The only way to conect to my server is to have the server connect to my access point (again Belkin, a wireless network access point F5D6130u). That's 802.11b.
Not sure I follow. Networking is ok with the builtin wireless but you'd rather use the slower pcmcia card that doesn't work 'out of the box'? Also you say 'you can't pick up your server.' What does 'pick up' mean? I did not know that wireless cards could do heavy lifting. If you're trying to access a server on your LAN that runs windows you might try Samba or set up a free ssh server on the windows box (like Cygwin) and use ssh.
I have quite a few problems. My next one is that I can't get my microsoft optical notebook mouse (this was bought when I hadn't yet discovered Knoppix) to work. It gets power; the LED on the bottom is working. But the cursor doesn't move and I can't scroll using the scrol wheel. I tried the modprobe command with various different arguments, with no avail.
No idea on this one really. Logitech wireless mice work fine w/ any LInux I have ever tried. At one time there was a cheatcode you could pas for wheelmice. Dunno if it will help or not.
In the control center thing for power controls, first of all, it completely ignores my settings for standby after a certain amount of time etc. And on the 'laptop battery' sub-bit, it complains about my computer having a partial ACPI configuration, and that I need to rebuild my kernel. *worries*. I looked into rebuilding Llinux kernels, it looks scary. Is there any easy way to fix this?
Thanks in advance.
There is an easy way to fix it. Get a distro like Kanotix that has support for ACPI built in. Oh and BTW rebuilding a kernel is not that hard especially when it's done the Debian way.
-
No, sorry, I think I typed it wrongly. My PCMCIA is faster. I'm pretty used to Windows networking...I mean, when I turn on the built-in wireless, it just...works. If my access point's switched on. I can browse internet, can access windows shares with samba...all works fine. But I remove the access point from the equation, I can't do anything.
Can you recomend any good tutorials online that show how to rebuild a Linux kernel with Debian?
-
Senior Member
registered user
Well sure I can. It just so happens that I wrote one. There are certainly others out there.
Similar Threads
-
By kn2user in forum General Support
Replies: 3
Last Post: 11-23-2004, 08:30 PM
-
By Liquidant in forum General Support
Replies: 2
Last Post: 05-20-2004, 07:28 PM
-
By jshah329 in forum Hardware & Booting
Replies: 3
Last Post: 05-18-2004, 12:43 AM
-
By Hunkah in forum General Support
Replies: 6
Last Post: 11-27-2003, 09:33 AM
-
By Henk Poley in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 08-11-2003, 01:27 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch
$59.99
Juniper EX 4300 EX4300-48P Gigabit Network Switch JunOS 21.4R3-S7 48 Port PoE
$249.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper EX 4200 Series 48PoE 48Port Gigabit Ethernet Switch EX3200/EX4200 Series
$43.99
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$50.00
Juniper EX2200-C-12P-2G 12-Port PoE+ Compact Managed Switch
$69.99
Juniper 48-Port GbE 8-Port PoE & 4-Port SFP Managed Network Switch EX4200-48T
$31.19
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$170.00
Juniper Networks SRX100 Services Security Appliance Part Number: SRX100H2
$22.50
Juniper EX4300-48P 48 Port PoE Gigabit Network Switch - COMES WITH DUAL POWER
$179.99