Try at boot: knoppix26 (as well as other cheatcodes you use) if the 2.6.x kernel would recognise your sata
Hi, Forum!
I've started Knoppix 3.7 on a Dell Optiplex with two S-ATA HD.
Knoppix didn't find any of them.
The lspci -v I've typed in my system, but I can't print or save it, because the printer isn't installed, else and ...no hd is found, too.
Is here anybody who can help me?
TIA with greetings,
Miksch
Try at boot: knoppix26 (as well as other cheatcodes you use) if the 2.6.x kernel would recognise your sata
Thank you Markus!
I'm going to try it!
Miksch
Good morning forum!
I just have tried it with typing knoppix26, but it didn't match. I've got the following output:
init: version 2.78 - knoppix booting
Has anybody else an idea how I could make Knoppix 3.7 find my S-ATA hd's?
TIA , with greetings!
Miksch
I have a similar problem with my Dell Optiplex gx280. Knoppix 3.7. will notboot Kernel 2.6, with the same symptoms you name.
I can boot Kernel 2.4. though, but it does not find any hard disk.
Kernel 2.6. finds the disks (I think) but then hangs
Please LMK if you find a solution, I will do the same.
hakayati
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$284.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$288.00
HP ProLiant BL460c G9 Server Blade 2x Intel E5-2660v3 256GB RAM NO HDD
$194.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.80
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00