http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hey Guys,
Heres the complete story:
Lost Windows OS due to "sys.ini" file corruption(source unknown). Had to re-install Win ME on primary HD (a Maxtor 10GB) from the "Restore'/Recovery" CD. Had a secondary HD (a WD Caviar 40GB) already installed at the time of the system "restore".
PROBLEM: All partition & file data on the secondary HD (the WD 40GB) seems to be "lost" gone.
QUESTION 1: Is the data really gone or is just the registry & partition data changed due to the "restore"???????????????.
These are the data recovery steps attempted so far:
1) used FDISK to check the partition info on the WD HD>>> no partition info listed.
2) used Western Digital's "Data LifeGuard Diagnostics" program to check >>> no partition info listed.
3) used "PC File Recovery" program to scan the WD HD for data files >>> found 700+ files which it can't read.
QUESTION 2: How can I use KNOPPIX to access/read/write/ & recover the data ???????????
Have Knoppix on disk & it boots up perfectly (many thanks!! ).
Have read "greenfly's" info on using the GPART program but am not sure exactly how to implement/use it (eg. where & when to type the command line info etc.) and/or what other steps are needed to recover data.
Any help appreciated
Thanks in advance
RGPHNX
PS- I know this info is here somewhere- have searched >>> "Data recovery" & other terms in the forums >>
gives thousands of posts. Have read for hours but can't narrow this down even with filtered searches. I'm not lazy, just need good sound info help.
http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hi Pureone,
Thanks for the link. Read it.
Question: How do I see the data (using Knoppix GUI) in the first place?? So I can save it!! (Have lots of experience in DOS[batch files etc.] but am a total Knoppix noobe.)
Don't know what "sudo fdisk" is. Do I need to use it first ?? & if so how???
I used the standard FDISK program on the Win ME boot disk to view the HD info.
Please advise.
RGPHNX
sudo fdisk -l is the command you enter in a console to show infomation about the harddrive.
as for seeing data thats rather easy you just click the icon with a harddrive on it to mount c:\ (hda1 in linux) and you will see all your data.
i will add more details to that text file later on. im guessing i left out too much stuff for most new comers to linux.
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM System p5 9131-52A 3.5" 4-Bay Server 80P6787 1 CPU 2GB 6 HD CADDIES TAPE BU
$275.00
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$349.99
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 40G Elastic Storage Server 5148-22L
$599.95
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$84.50
IBM Server eServer | IBMR1000 | UPS 1000VA 700W -Without Batteries
$115.00
43W4342 IBM SERVER RAID MR10M SAS/SATA BATTERY PACK W7-3(5)
$17.97
$7000.00
IBM X3850 M2 4U Rack Server BOOTS 4x Xeon MP 2.93Ghz Hot Swap 32GB RAM NO HDDs
$279.99