after some other problems i had, i recompiled a kernel (standard kernel-source-2.4.20 from debian) using the .config in /usr/src/linux/. i compiled ext3 into the kernel (not a module). that seems to have fixed it.
hi! i've installed knoppix 3.2 and everything works fine... <suspense>... except... i get the following warning in syslog (dmesg):
when i installed knoppix i specified the root partition (/dev/hda5) to use ext3 as filesystem and then afterward added and mounted my existing '/home/' partition (/dev/hda6) as ext3. firstly, here are the relevant parts of my /etc/fstab:Code:EXT2-fs warning (device ide0(3,5)): ext2_read_super: mounting ext3 filesystem as ext2
the output from 'mount':Code:... /dev/hda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda6 /home ext3 defaults 0 1 ...
BUT! look at this... the output of 'cat /proc/mounts':Code:# mount /dev/hda5 on / type ext3 (rw,errors=remount-ro) none on /proc type proc (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/hda6 on /home type ext3 (rw)
it looks like there seems to be only one instance of kjournald running (for my /home/ partition i assume)Code:# cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext2 rw 0 0 none /proc proc rw 0 0 devpts /dev/pts devpts rw 0 0 /dev/hda6 /home ext3 rw 0 0
when i have the occasional crash, fsck is run on /dev/hda5, but never on /dev/hda6. yet both are supposed to be journaling. i have had corruption on my root partition as a result.Code:# ps aux| grep kjournald root 137 0.0 0.0 0 0 ? SW 18:27 0:00 [kjournald] root 1670 0.0 0.0 1288 424 pts/0 R 21:29 0:00 grep kjournald
i've done some searching on google and groups.google (see second item below 'old stuff' http://groups.google.co.nz/groups?hl...1%40zip.com.au) and it seems that the problem is that the kernel is loaded, but it can't access the root partition using ext3, because it doesn't have ext3 support compiled in - as ext3 is compiled as a module. so instead it mounts it as ext2. so i could presumably compile a kernel with ext3 built in and run lilo. call me picky, but i really think that if knoppix allows you to format a root partition as ext3, it should mount it as ext3 in the future...
the other alternative is something to do with the way initrd works, but i'm completely lost when it comes to that.
what should i do?
sorry for the long post. i wanted to make sure i supplied all the info i could.
cheers
julian
after some other problems i had, i recompiled a kernel (standard kernel-source-2.4.20 from debian) using the .config in /usr/src/linux/. i compiled ext3 into the kernel (not a module). that seems to have fixed it.
knx-hdinstall should ahve created an good initrd that should ahve soled this problem ...Originally Posted by gwylion
Hm...
Could you say exactly which version you did use ?
And that you did change nothing on system after installation ?
cu
Fabian
i used KNOPPIX_V3.2 -2003-03-28-EN.iso which admittedly is not the latest and greatest, so it might have been fixed since then. however, since i haven't tried the latest version yet, for all i know it may still have the same issue. it's a bit subtle and i don't know how many people would have picked it up... if it wasn't for my dodgy hardware causing the occasional crash, i probably would never have noticed.
and no, i did not change the system at all after installation.
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$93.24
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
TP-Link TL-SG1008D 10/100/1000 Mbps 8-Port Gigabit Desktop Ethernet Switch.
$10.00
Cisco WS-C2950-24 Layer 2 Switch 24-Port 10/100 Catalyst 2950 Series
$25.00
Netgear GS110TP ProSafe 8Port Gigabit Smart Switch w/ PoE & Fiber Uplink
$39.95
HP ProCurve 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A TESTED
$30.70
TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch
$50.00
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97