-
Senior Member
registered user
Advice on enabling ACPI in Knoppix
Hi;
I just put Knoppix 3.1 on a brand new machine. When knoppix shuts down it does not shut the machine down. I would like it to. I think I may need to recompile the knoppix kernel to include acpi.
I think this because:
- lsmod|grep apm returns no messages
- running insmod apm returns these errors:
------------------------------------------------
Using /lib/modules/2.4.20-xfs/kernel/arch/i386/kernel/apm.o
/lib/modules/2.4.20-xfs/kernel/arch/i386/kernel/apm.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
---------------------------------------------------
lsmod | grep ACPI returns nothing
There is no /proc/acpi
Anyway, I think my machine can ACPI
Motherboard:
"Intel Desktop Board D845PESV"....this is also the name of the chipset.
My bios has a menu for power features called "acpi" ( not apci )
It had these options:
silent boot - enabled
intel rapid boot - enabled
scan user flash area - enabled
pxe boot to lan - disabled
usb boot - enabled
chasis intrusion - disabled.
Am I correct in my understanding that Knoppix is not put together in the same way ( kernel wise ) as regular gnu/linux?
I tried looking at some generic docs for recompiling kernels.
executing make[config|xconfig|menuconfig] just produces an error message a
" no rule to make target ( pick one of the previous 3 ) stop. I tried from /usr/src/linux
Anyway, how do I recopile the Knoppix kernel so shutting off knoppix shuts down the machine? I would like to keep everything else about the kernel the same.
Thank in advance for the info
Steve
-
Well, I don't know much about linux, or about ACPI for that matter, but I do know that, in my PC emulator, after logging out, it does shut down the emulator, rather than having to power it down manually. Also, I had tested an older version on a classroom computer, and it shut down properly too, however, I have yet to test this installed on the hard disk, so, my post here is probably useless, but maybe not.
-
the ACPI is not avalaible on the knopppix kernel ..
klaus just told me that the kernel patch was crashing most of the coputer so he did not patch the kernel .. But wth the live cd the apm is loaded by default if your bios is compatible so .. have a look !! if not try /etc/init.d/apmd
to start the apm sever
Similar Threads
-
By acer0001 in forum Customising & Remastering
Replies: 2
Last Post: 03-07-2005, 11:48 PM
-
By helios17 in forum General Support
Replies: 1
Last Post: 11-21-2004, 01:11 AM
-
By macguyvok in forum Laptops
Replies: 6
Last Post: 03-27-2004, 07:47 PM
-
By stefan_tm in forum The Lounge
Replies: 0
Last Post: 03-02-2004, 11:56 PM
-
By bxb32001 in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 10-24-2003, 06:17 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$284.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c G9 Server Blade 2x Intel E5-2660v3 256GB RAM NO HDD
$194.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.80
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
DELL POWEREDGE FC640 Blade Server FX2 CTO Barebones iDrac Enterprise Warranty
$249.00
HP ProLiant BL460c Gen9 E5-2690 Blade Wholesale CTO - Custom to Order
$280.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95