You probably need to use one of the cheatcodes. See the documentation section above.
Or, tell us the monitor and the chances are that someone knows what works for it.
As I try to boot Knoppix from the CD, everything seems to boot normally and properly. However, when the screen says that it is "Starting X11" the screen flashes a few times. After that, the monitor turns into static or snow like bad reception on a TV. I've never seen a monitor do this before.
The OS seems to be running all right in the background because when I push "Ctrl - Alt- Delete" then enter, it shuts down the system. This leads me to believe that everything is booting properly except for the video configuration or something.
Anybody have an idea of how to fix this. Any reply would be appreicated.
Without Wax,
TJS774
You probably need to use one of the cheatcodes. See the documentation section above.
Or, tell us the monitor and the chances are that someone knows what works for it.
The Monitor is a Gateway EV700. Any idea on which cheat codes I should try first? How do I enter a cheat code? I thought I saw a post about that. Do I just hit "F2" or something at the boot screen?
Without Wax,
TJS774
Easy way is to just put it in after you see theOriginally Posted by tjs774
boot:
prompt, so it looks like
boot: (cheatcode)
I had a related problem using an OLD monitor ... seems the monitor didn't have enough resolution to support Knoppix. What I was getting was about 3 Knoppix screens side by side w/ a trashed raster and it was 'colored' snow. The monitor is an old beater. So I put one of my newer monitors on, and it boots fine. I had no luck w/ the cheat codes ... but maybe if I were smarter, I would have. Despite Knoppix's goal of sensing and automatically enabling hardware, they seem to have thrown out support for ancient hardware.
IF you don't have another newer monitor, I had luck getting a fine monitor for $30 at a computer & monitor recycling center near me.
Lagniappe
I got the same until i typed
screen=800x600
at the boot prompt. Now it's fine.
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
0XYHWN Dell PERC H730P PCIe 3.0 SAS 12GB RAID CONTROLLER
$65.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI SAS3008 12Gbps SAS HBA RAID Controller Card P/N:YZCA-00424-101 Tested
$24.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
RGB 4/5 Bay RAID USB 3.0 to SATA External Hard Drive Enclosure for 2.5/3.5'' HDD
$170.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$175.99