-
Knoppix version obove 3.4 don't work on my router. DHCP
Hi,
I having this problem with my router to surf the net when I use knoppix obove version 3.4.
I’ having a conexxant 4 port router/dlink 530Tx
When I use knoppix 3.3 on my pc....my hardware was detected clean as a whistle, dhcp detected properly(In boot sequence show back grounding) .....everything run smoothly. I could access the internet /everything run.
When I tried version 3.6/3.7/3.82
The kernel seem panicking.
During the boot sequence everything detected properly also...no error message .
(Dhcp detected/back grounding>the same message in version 3.3)
when I comes to gui screen >comes the audio(Initiating startup sequence)>audio hang repeating (initiating) till kde finish loading....audio kept repeating.
1.)I manage to solve the audio problem by running alsa audio config again
2.)Now the difficult part is on boot sequence>boot mesg shows dhcp detected/backgrounding,but I still can access any internet access.
3.)I have ran Netcard config use Dchp detection but it shows error. I tried to boot version 3.3 get what ever setting that was on >>>replace configuration in version 3.6/3.73/3.82 upon bootup...without success getting my connection up.
Question.
1.)Is their a way to restart the Ethernet driver and Dhcp similar to alsa Audio config?
2.)What sort of information shall I need to get from version 3.3....to be implanted on version 3.4 above to get the lan working ?
Plse Can anyone help me!!!!! ......
I have already spent the last 4 day in the forum to searching for similar problem.....
some just have to rerun netcardconfig everything ok!!! but mine It shows dchp not detected error.
-
Administrator
Site Admin-
Re: Knoppix version obove 3.4 don't work on my router. DHCP
Originally Posted by
frenco
Question.
1.)Is their a way to restart the Ethernet driver and Dhcp similar to alsa Audio config?
This seems to depend on just what interface you have, but it works in my notebook: sudo mii-tool -r and then a netcardconfig . I think there are some other commands that will reset/restart the interface if mii-tool doesn't work for you, but I don't know what they are. You might also want to look at the pump command, I never did quite understand exactly what it does.
-
Re: Knoppix version obove 3.4 don't work on my router. DHCP
Originally Posted by
Harry Kuhman
Originally Posted by
frenco
Question.
1.)Is their a way to restart the Ethernet driver and Dhcp similar to alsa Audio config?
This seems to depend on just what interface you have, but it works in my notebook:
sudo mii-tool -r and then a
netcardconfig . I think there are some other commands that will reset/restart the interface if mii-tool doesn't work for you, but I don't know what they are. You might also want to look at the
pump command, I never did quite understand exactly what it does.
I have tried
http://kanotix.com/files/kanotix/
It is also based on knoppix ...I ran smoothly.......no prob......what could be wrong with with knoppix 3.4 above ?
I have tried this command sudo mii-tool -r >but there is an error
I'll try to read thru the pump< > Thanks..
Similar Threads
-
By dundas in forum Networking
Replies: 3
Last Post: 09-06-2010, 11:46 AM
-
By jfern in forum Networking
Replies: 3
Last Post: 05-04-2006, 12:01 PM
-
By lyran12 in forum Networking
Replies: 0
Last Post: 04-24-2005, 05:46 PM
-
By drekidd in forum Networking
Replies: 26
Last Post: 08-25-2004, 09:12 PM
-
By bongski55 in forum The Lounge
Replies: 12
Last Post: 05-11-2004, 12:57 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.47
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.80
Seagate Enterprise Capacity 8TB 7200 RPM Internal Hard Drive ST8000NM0045
$147.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.60
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$19.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
*LOT OF 40* 500GB Desktop PC 3.5" SATA Hard Drive HDD*Tested*
$212.00