-
monitor displays nothing when starting knoppix
i've just recently downloaded knoppix, and i burned it onto a cd, hoping i would be able to use it by today. i stick the disk into my drive, wait for my computer to boot up, get the the little "do you want to use knoppix" screen, pressed enter, and......nothing.
when i pressed enter, a little message that said "Out of Range popped up onto my monitor. how can i fix this so that i can view Knoppix?
my monitor is a Microtek 710S
My video card is an SIS 650 (i belieive; its something like that)
i'm using Knoppix 3.9
if there is anymore information i should provide, please ask.
-
Senior Member
registered user
It sounds like knoppix is doing the best it can at autodetecting the video hardware (perhaps getting it wrong) & then setting a resolution & refresh rate that is beyond the capabilities of the hardware. Try booting knoppix with some Cheat Codes, such as:
knoppix screen=800x600 xvrefresh=60
knoppix screen=640x480 xvrefresh=60
I hope this helps.
James
-
thanks for your help, but unfortunately this didnt resolve the problem
the same message is popping up on my monitor.....any other ideas as to what to do?
-
I have the same problem when booting up, the screen resolution & refresh rate is different so during start up the screen become distorted.
I am new to Knoppix, can anyone teach me where to find boot prompt to configure it and save the configuration to the harddisk so the next boot up can start to that setting.
-
should i mention that when the message "Out of Range", its a monitor message, coming from the monitor. Knoppix is not delivering the message.
agh i'm so confused.
-
-
It must be SYNC OUT OF RANGE not Out of range ... I think ur using a very old monitor.
-
Senior Member
registered user
Originally Posted by
indiandude514
should i mention that when the message "Out of Range", its a monitor message, coming from the monitor.
Have a look at the cheatcodes, especially the Tips & Tricks.
If you are unable to book Knoppix, try one or both of these two boot commands:
boot: knoppix vga=0 debug -b 3
...
boot: failsafe debug -b 3
Are you able to get to the final stage? If not, what is the last stage you are able to get to?
Regards,
- Robert
http://www.cwelug.org/
Similar Threads
-
By daviddoria in forum Hardware & Booting
Replies: 7
Last Post: 05-15-2010, 11:42 PM
-
By robwelch100 in forum General Support
Replies: 0
Last Post: 04-02-2005, 02:48 AM
-
By kenelder in forum General Support
Replies: 8
Last Post: 07-12-2004, 06:42 PM
-
By Zer0th in forum General Support
Replies: 0
Last Post: 04-02-2004, 05:01 AM
-
By tommydl in forum Ideas
Replies: 0
Last Post: 03-29-2004, 08:30 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lenovo 500w Gen 3 Laptop, 11.6" IPS Glass, N6000, 8GB, 128GB SSD, Win 11 Home
$199.00
Lenovo ThinkPad E15 Gen 2, AMD Ryzen 5 4500U, 8GB RAM, 256GB SSD, No OS
$190.00
Lenovo Notebook ThinkPad L13 Yoga Gen 3 Laptop, 13.3" IPS 60Hz, i7-1255U, 16GB
$607.99
Lenovo - Ideapad 3i 15.6" FHD Touch Laptop - Core i5-1155G7 with 8GB Memory -...
$349.99
Lenovo Legion Pro 5i Gen 9 Intel Laptop, 16" IPS, i9-14900HX, 32GB, 2TB
$1589.99
Notebook Lenovo Slim Pro 9 Laptop, 16" Glass, i9-13905H, 32GB, 1TB SSD
$943.79
Lenovo ThinkPad T470s | 14'' | Core i5-7300U | 8GB RAM | 256GB SSD | WIN 11 PRO
$99.99
Lenovo Ideapad 1 15Amn7 15.6" Laptop Ryzen 3 7320U 8GB 256GB SSD W11H-64
$199.99
Lenovo Laptop Computer ThinkPad 14" Core i5 8GB RAM 256GB SSD WiFi Windows 10 PC
$169.98
~10th Gen~ 14" Lenovo i5 Quad Core Laptop: 16GB RAM 512GB SSD Windows 11 Pro
$314.99