-
How to recognize and save file to USB JUMP DRIVE
I remember reading somewhere that there is a way to load knoppix LiveCD(I have version 3.6) and save files from windows onto a USB Jump Drive... There were a few steps (this is i little foggy so bare with me):
When you connect the USB (after knoppix loads completely) it will recognize the device. However, you will not be able to save files from windows on your USB jump drive until you configure it.... I was wondering if anyone could assist me in this process, as I am looking to use Knoppix as a way to recover lost files due to a crashed hard drive....
Any Help Would Be Appreciated
-
Senior Member
registered user
Re: How to recognize and save file to USB JUMP DRIVE
This may help:
http://www.knoppix.net/forum/viewtop...991&highlight=
--The USB stick should be /dev/sda; the partition should be /dev/sda1.
--Basically you just have to tell /etc/fstab that the owner of /dev/sda1 is knoppix (or your non-root userid: )
/etc/fstab entry:
Code:
/dev/sda1 /mnt/whatever vfat defaults,auto,users,suid,uid=knoppix,noexec,noatime,rw 0 0
--And of course the directory "/mnt/whatever" has to exist.
Originally Posted by
ryhder
I remember reading somewhere that there is a way to load knoppix LiveCD(I have version 3.6) and save files from windows onto a USB Jump Drive... There were a few steps (this is i little foggy so bare with me):
When you connect the USB (after knoppix loads completely) it will recognize the device. However, you will not be able to save files from windows on your USB jump drive until you configure it.... I was wondering if anyone could assist me in this process, as I am looking to use Knoppix as a way to recover lost files due to a crashed hard drive....
Any Help Would Be Appreciated
-
Thanks for the advice. Will try
Similar Threads
-
By starlyptErin_. in forum General Support
Replies: 1
Last Post: 08-26-2009, 02:00 AM
-
By smoky in forum General Support
Replies: 2
Last Post: 06-08-2006, 02:05 PM
-
By buddhainside in forum MS Windows & New to Linux
Replies: 7
Last Post: 02-26-2006, 08:46 PM
-
By Mankal in forum Laptops
Replies: 2
Last Post: 11-16-2005, 04:15 PM
-
By ryhder in forum The Lounge
Replies: 6
Last Post: 08-28-2005, 03:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM Power 740 8205-E6D Express 8-SFF Power7+ 4.2GHz CPU 64GB RAM *No HDD* Server
$239.99
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$349.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$84.50
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Server eServer | IBMR1000 | UPS 1000VA 700W W/New Batteries
$115.00
IBM S822LC 8335-GCA Power 8 2U Server 2xPower8 TESTED - Missing one PCIE riser
$495.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM QRadar xx29 Server 4412Q2A
$293.99