Sorted the problem by disabling legacy USB support in the BIOS.
G'day.
Knoppix v4.0.2 works great from DVD, but once installed to the hard drive does not like the touchpad. Pointer will not move.
Not sure what is happening, but am convinced it should be fixable as it works while running from disk.
Any assistance would be appreciated.
Also, noted the forum about the DVD version is locked, but some folks were asking about the install to hard drive. I got it to work, eventially, but did experience the kernel panics.
Cheers.
.b
Sorted the problem by disabling legacy USB support in the BIOS.
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.00
Open Eye OE-MTX08 8TB Micro Server With Linux (Boots To Login) No Accessories
$282.92
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$183.08
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75