Try this: from a root shell type: ifconfig ath0 up
Then type: ifconfig, by itself.
If it shows up there type: pump -i ath0
Then type ifconfig by itself again and see if it has obtained an ip address from the router, proceed with ping tests etc.
Cable Internet, Linksys router, WeG511t card, and knoppix 5 CD.
I got the card loaded, use ifconfig ath0 up and I auto connect to my router. (no security)
iwconfig shows my essid, signal, mac and all that jazz but no ip. I cannot ping anything but 127.0.0.1
Okay, same general issue as alot of people, but unlike what I've read, my card is ath0, so when I netcardconfig, I can't see it, only eth0-2 Therefore i can't say "yes" to DHCP to get an ip from the router.
Using Wan card config, I see my ath0, but that doesn't ask the DHCP question.
SO BASICALLY I'm stuck being connected to my router but not able to get an IP.
So please help me oh great Knoppix folks.
Try this: from a root shell type: ifconfig ath0 up
Then type: ifconfig, by itself.
If it shows up there type: pump -i ath0
Then type ifconfig by itself again and see if it has obtained an ip address from the router, proceed with ping tests etc.
I hope your a girl, causee i love you! I couldn't figure out the "pump" command. The bad part of linux man pages is you got to what manua to read....Originally Posted by rusty
now to be the 1337 h4ck3r..........
Okay, have another issue, Now when I goto the wireless manager it is trying to use the eth1 card (my broadcom) not my ath0 (511T) This happened after i started up WEP encryption and connected. All worked great but the wireless manager so I can check my signal strength.
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$284.00
HP ProLiant BL460c G9 Server Blade 2x Intel E5-2660v3 256GB RAM NO HDD
$194.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.80
Nice used Cisco. UCS B440 M2 blade chassis parts or repair
$100.00
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$288.00
Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730
$449.99