-
"starting udev hot-plug hardware detection" - prob
hello,
i cant boot knoppix dvd v2.86 . it gets as far as starting udev hot-plug hardware detection then hangs.
ive tried the following:
vga=0
acpi=off pnpbios=off noapic noapm
vga=0 debug -b 3
debug -b 3
noudev
nodma
noagp
xmodule=vesa
these have no effect.
im running a dell dimension 2300 with a pentium 4 2.6ghz 1g ram. with a geforce fx 5200
any ideas?
-
*UPDATE*
OK, I tried running the scan to see if there were any errors on the DVD. It came back with the message "everything looks ok" then it tried to continue booting. Then it gave me the following errors:
'/sbin/modprobe' abnormal exit
'/sbin/modprobe' failed X 4
'/bin/sh' failed X 8
'lib/udev/usb_id' failed
'lib/udev/path_id' failed
then it hung again.
Please! Someone help me remove the bain of Microsoft from my life...
-
*UPDATE*
tried this list:
noapic
noagp
noapm
nodma
nomce
nofirewire
nopcmcia
noscsi
noswap
nousb
nosmp
noaudio
and all at the same time.
HELP!!!
-
*UPDATE*
Ive also tried disabling my graphics card and switching back to the origional this didnt work either...
-
*UPDATE*
i've tried it on a Tiny AMD Athlon 1.3mHz and it works fine.
Could this be a mouse problem?
HHHHEEEELLLLPPPP!!!!
-
*UPDATE*
Its not the mouse.
-
i think ill just stick with windows...
-
Senior Member
registered user
"knoppix dvd v2.86"? Might be why nobody responded?
-
i was under the impression that, that was the lastest version. i downloaded via the torrent that is linked from this website.
-
Senior Member
registered user
If you downloaded the most recent, then it should be version 5.1.1. Version 5.2 should be out sometime in the near future. You can also try an older version to see if it handles your hardware better. Trying the CD version first would eliminate a long download, just to find out it didn't work.
You could try the "failsafe" cheat code. Be sure to type "knoppix" first and then the cheatcode(s) you wish to use, like "knoppix nodma". The failsafe code will eliminate several common issues and then it would be process of elimination to drill it down to the individual issue if it works. Here is a link to some cheatcode information: http://www.knoppix.net/wiki/Cheat_Codes It usually takes a little experimentation to find a cheatcode or combination that will work with your hardware. I don't have a Dell 2300 here to try, but It looks like the hardware is not uncommon. You can also try the "nohwsetup" option. Even the "noswap" code has yielded results in a few instances. You appear to have tried the "nodma" code already and that one has proven useful with some hardware.
Another issue could be that the disk is somehow defective. Either it was burned at too high a speed or the media itself is not compatible with the drive you are using, or just plain defective. The fact that it works on another machine is not a good indicator, since some drives read bad or certain types of media better than others. I have had several instances where some DVD drives will not read DVD-R media as well as DVD+R and vice versa. I would also verify the MD5 Sums, just in case you had a bad download. It's very rare with a torrent download, but it has been known to happen.
Good Luck!
Similar Threads
-
By ironee in forum Hardware & Booting
Replies: 0
Last Post: 10-12-2009, 01:53 AM
-
By Vetrivela in forum Hardware & Booting
Replies: 9
Last Post: 02-12-2009, 04:46 PM
-
By darrmik in forum Hardware & Booting
Replies: 7
Last Post: 01-15-2009, 05:03 PM
-
By ReinholD in forum Hardware & Booting
Replies: 0
Last Post: 07-04-2006, 10:09 PM
-
By cowmix in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 03-06-2005, 11:26 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R630 Server 2x E5-2650v3 2.30Ghz 20-Core 96GB 2x 300GB H330
$240.10
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
Dell Poweredge R720 2x Xeon E5-2670 v2 2.5GHz 20-Cores / 128gb / 600gb / H710
$249.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 128gb / H730 / iDracEnt
$319.99
DELL PowerEdge R730XD 26 Bay 2x E5-2667v3 3.2GHz =16 Cores 128GB H730 4xRJ45
$424.00